Search
Now showing items 1-10 of 74
Impact of differently prepared paper Production Waste Sludge (PSW) on cement hydration and physical-mechanical properties
(4th World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium (WMCAUS 2019), 17-21 June 2019 : abstract collection book, 2019)
After analysis of calorimetric tests results of the cement mixtures with PSw prepared at different temperatures and SEM, XRD, physical-mechanical properties results of cement stone hardened for 7 and 28 days, it is determined ...
The impact of bitumen roofing productionwaste (BTw) on physical mechanical properties of concrete
(4th world multidisciplinary civil engineering-architecture-urban planning symposium : WMCAUS 2019 : abstract collection book : 17-21 June 2019, Prague, Czech Republic., 2019)
The effect of milled fluidized catalytic cracking catalyst waste on calcium aluminate cement hydration and structure formation of binder
(2nd Journal of Thermal Analysis and Calorimetry Conference. Budapest, June 18-21, 2019 : book of abstracts, 2019)
In this work, the hydration of calcium aluminate cement (CAC, Al2O3>70%) binder mixtures with additives (0%, 1%, 5% and 10%) of non-milled fluidized catalytic cracking catalyst (FCCC) waste and milled FCCC waste was ...
Composite Ni-based coatings with spherical Al2O3 microceramics
(Advanced materials and technologies 2018: 20th international conference-school, August 27-31, 2018, Palanga, Lithuania : book of abstracts, 2018)
Utilisation of drinking water treatment sludge for the manufacturing of ceramic products
(3rd International Conference "Innovative Materials, Structures and Technologies" (IMST 2017), Riga Technical University, Riga, Latvia, 27-29 September 2017 : abstracts, 2017)
The investigation iron-based cored wires for thermal arc spraying
(The 13th International Conference “Mechatronic Systems and Materials (MSM - 2017)”, 3-5 July, 2017, Vilnius, Lithuania: abstracts, 2017)
This paper presents new experimental created iron-based cored wires, for thermal arc spraying, doped with Mn-Cr-Mo-Ni-Mn-Cr-Mo, Mn-Cr system alloying elements, which exhibit exceptional tribological properties of coatings ...
Study of creep polystyrene foam (EPS) in constant compressive stresses using statistical design of experiments
(Инновации в жизнь = Innovations in LIFE, 2017)
The results obtained in long-term testing under constant compressive stress of the cut from the Slabs EPS 50/100 and EPS 150 with the density ranging from 15 to 24 kg/m 3, which were manufactured by the same manufacturer ...
The influence of carbon nanotubes on the properties of water solutions and fresh cement pastes
(3rd International Conference "Innovative Materials, Structures and Technologies" (IMST 2017), Riga Technical University, Riga, Latvia, 27-29 September 2017 : abstracts, 2017)
The influence of aggregates type on W/C ratio on the strength and other properties of concrete
(3rd International Conference "Innovative Materials, Structures and Technologies" (IMST 2017), Riga Technical University, Riga, Latvia, 27-29 September 2017 : abstracts, 2017)
The influence of different types of aggregates and W/C ratio on concrete properties is analysed. In order to achieve this aim, lightweight (with expanded clay aggregate) and normal concrete (with gravel aggregate) mixtures ...
Experience obtained during the ten years of the sound classification practical use for regulation building acoustics in Lithuania
(Journal of the Acoustical Society of America. 3rd joint meeting of the Acoustical Society of America and the European Acoustics Association : abstracts, 2017)
Advantages of application the sound classification schemes were foreseen in the two applications. In the legal regulation, the scheme expresses in the users friendly and easy understandable form protection against noise ...