Browsing by VGTU prioritized fields "MC03 - Išmaniosios įterptinės sistemos / Smart embedded systems"
Dabar rodomi įrašai 1-20 iš 71
-
Aberration-insensitive microscopy using optical field-correlation imaging
(APL Photonics, 2019)The possibility to reduce the effect of optical aberrations has been proposed in several publications on classical ghost imaging. The two-armed ghost-imaging systems make use of spatially incoherent illumination and ... -
Adaptation of the management model of internationalization processes in the development of railway transport activities
(Sustainability, 2020)The paper analyzes the importance of the system of management of internationalization processes in developing railway transport. The article also highlights the synergistic effect of a multilevel management model in ... -
Adaptyvių slydimo guolių darbo charakteristikų vertinimas taikant daugiakriterinius-statistinius analizės metodus
(Inžinerinės ir edukacinės technologijos = Engineering and educational technologies, 2018)Darbe pateikti rotorinių sistemų su adaptyviais slydimo guoliais 3 konstrukcijų guoliais darbo charakteristikų daugiakriterinė-statistinė analizė. Eksperimentiniams tyrimams atlikti naudotas specialus stendas su matavimo ... -
Advanced applications of industrial robotics: new trends and possibilities
(Applied sciences: Special issue: Trends and challenges in robotic applications, 2022)This review is dedicated to the advanced applications of robotic technologies in the industrial field. Robotic solutions in areas with non-intensive applications are presented, and their implementations are analysed. We ... -
Algorithm for reducing truck noise on Via Baltica transport corridors in Lithuania
(Energies, 2020)The section of Via Baltica going through the territory of the Republic of Lithuania is the most traffic intensive land logistics corridor in the country. The annual transportation volume has been increasing on this road; ... -
An automotive ferrofluidic electromagnetic system for energy harvesting and adaptive damping
(Sensors: Sensors and Modern Technologies for Road, Robotic, and Intelligent Vehicle, 2022)Vibration energy harvesting is receiving significant interest due to the possibility of using extra power in various machines and constructions. This paper presents an energy‐harvesting system that has a structure similar ... -
An extension of the failure mode and effect analysis with hesitant fuzzy sets to assess the occupational hazards in the construction industry
(International journal of environmental research and public health, 2020)The construction industry is considered as one of the most dangerous industries in terms of occupational safety and has a high rate of occupational incidents and risks compared to other industries. Given the importance of ... -
Analysis of dynamic parameters of a railway bridge
(Applied sciences, 2019)This article analyses the dispersion of vibration accelerations of a railway bridge during the passage of a train, and presents an analysis of their parameters after the application of the theory of covariance functions. ... -
Atominių jėgų mikroskopo jutiklio mechaninės struktūros modeliavimas ir dinaminių charakteristikų tyrimas
(2019)Vis daugėjant mokslinių tyrimų, kuriems atlikti reikalingas atominių jėgų mikroskopas, išlieka aktualus klausimas kaip padidinti šio įrenginio darbo greitį bei kaip parinkti skenavimo režimus, dirbant su skirtingomis ... -
Characteristics and functionality of cantilevers and scanners in atomic force microscopy
(Materials, 2023)In this paper, we provide a systematic review of atomic force microscopy (AFM), a fast-developing technique that embraces scanners, controllers, and cantilevers. The main objectives of this review are to analyze the available ... -
Comparative proteomic analysis of pollen of Trifolium pratense, T. alexandrinum and T. repens
(Zemdirbyste-Agriculture : scientific journal, 2014)Clovers are widely distributed, but their pollen proteome still has not been completely elucidated. In this study we performed a comprehensive comparative proteomic analysis of red, berseem and white clover pollen. Hand- ... -
Design of 3-axis positioner mechanical drives
(Open readings 2018: 61st international conference for students of physics and natural sciences, March 20-23, 2018, Vilnius, Lithuania : programme and abstracts, 2018) -
Development of electrostatic microactuators: 5-year progress in modeling, design, and applications
(Micromachines: Special issue: Feature papers of micromachines in physics 2022, 2022)The implementation of electrostatic microactuators is one of the most popular technical solutions in the field of micropositioning due to their versatility and variety of possible operation modes and methods. Nevertheless, ... -
Development of medical plant drying method based on the control of relative humidity
(Open readings 2021 : 64th international conference for students of physics and natural sciences, March 16-29, 2021, Vilnius, Lithuania : abstract book, 2021) -
Digital twin as a virtual sensor for wind turbine applications
(Energies: Magnetic Field Computations and Energy Efficiency Studies in Electrical Machines, 2023)Digital twins (DTs) have been implemented in various applications, including wind turbine generators (WTGs). They are used to create virtual replicas of physical turbines, which can be used to monitor and optimize their ... -
Digital twin of wind generator for modelling various turbine characteristics
(2023 International Conference on Electrical Drives and Power Electronics, EDPE 2023 - Proceedings, 25-27 September 2023, The High Tatras, Slovakia, 2023)This article describes the digital twin of the wind generator. The model of the turbine provides a valuable tool for monitoring, controlling, and predicting the wind generator’s behavior. This type of algorithm allows for ... -
Effect of yttrium and rhenium ion implantation on the performance of nitride ceramic cutting tools
(Materials: Special Issue Machinability of Metallic Materials and Composites, 2020)In the paper, the results of experimental investigations of ion implanted cutting tools performance are presented. The tools, made out of Si3 N4 with additives typically used for turning of Ti-6Al-4V alloy, underwent ... -
Evaluation of motion characteristics using absolute sensors
(Automation 2021: Recent achievements in automation, robotics and measurement techniques, 2021)Definition of movement trajectories using absolute sensors is a challenging problem in various application fields due to the appearing additive errors. For the trajectory definition, most often used Inertial measurement ... -
Experimental research of force/pressure sensor static and dynamic accuracy and repeatability
(Open Readings 2021: 64th international conference for students of physics and natural sciences, March 16-19, 2021, 2021)The progress observed in 'soft robotics' brought some promising research in flexible tactile, pressure and force sensors, which can be based on polymeric composite materials. Therefore, in this paper, we intend to evaluate ... -
Extraction of information from a PSD for the control of vehicle suspension
(Automation 2021: Recent achievements in automation, robotics and measurement techniques, 2021)Road irregularities are the main effect influencing driving quality, due to its unpredictability driver can not find the best driving parameters easily and fast. Identification of road profile lets us control the vehicle’s ...