Now showing items 2266-2285 of 16505

    • Cadmium stannate films for immobilization of phospholipid bilayers 

      Valiūnienė, Aušra; Margarian, Žana; Gabriūnaitė, Inga; Matulevičiūtė, Vaida; Murauskas, Tomas; Valinčius, Gintaras (Journal of the electrochemical society, 2016)
      Cadmium tin oxide (CTO) films on glass substrates were synthesized and functionalized by octadecyltrichlorosilane (OTS). CTO films were transparent with the bandgap of 2.92 eV. They exhibited n-type conductivity and carrier ...
    • Calcium electrochemotherapy for tumor eradication and the potential of high-frequency nanosecond protocols 

      Radzevičiūtė-Valčiukė, Eivina; Želvys, Augustinas; Mickevičiūtė, Eglė; Gečaitė, Jovita; Zinkevičienė, Auksė; Malyško-Ptašinskė, Veronika; Kašėta, Vytautas; Novickij, Jurij; Ivaškienė, Tatjana; Novickij, Vitalij (Pharmaceuticals: Pharmaceutical Science in Electrochemotherapy, 2023)
      Calcium electroporation (CaEP) is an innovative approach to treating cancer, involving the internalization of supraphysiological amounts of calcium through electroporation, which leads to cell death. CaEP enables the ...
    • Calcium electroporation causes ATP depletion in cells and is effective both in microsecond and nanosecond pulse range as a modality of electrochemotherapy 

      Radzevičiūtė-Valčiukė, Eivina; Malyško-Ptašinskė, Veronika; Mickevičiūtė, Eglė; Kulbacka, Julita; Rembiałkowska, Nina; Zinkevičienė, Auksė; Novickij, Jurij; Novickij, Vitalij (Bioelectrochemistry, 2024)
      Calcium electroporation is a modality of electrochemotherapy (ECT), which is based on intracellular electric field-mediated delivery of cytotoxic doses of calcium into the cells resulting in rapid cell death. In this work, ...
    • Calcium fluxes into and out of cytosol in human platelets: analysis of experimental data 

      Juška, Alfonsas (Biochemical and Biophysical Research Communications, 2011)
      The purpose of this research was to analyse experimental data concerning cytosolic calcium concentration in view of the mechanisms involved in calcium fluxes in human platelets. The parameters of model curves are related ...
    • Calcium hydroxyapatite coatings: Low-temperature synthesis and investigation of antibacterial properties / 

      Lukavičiūtė, Laura,; Karčiauskaitė, Justina,; Grigoravičiūtė, Inga,; Vasiliauskienė, Dovilė,; Sokol, Denis,; Kareiva, Aivaras, (Coatings: Advances in Surface Engineering and Biocompatible Coatings for Biomedical Applications., 2023.)
      In the present work, the low-temperature synthesis of substituted calcium hydroxyapatite (Ca10(PO4 )6(OH)2 , HAP) with copper and zinc ions on titanium substrates was performed. Initially, CaCO3 coatings were synthesised ...
    • Calcium stores, SERCAs and PMCA in human platelets stimulated by thrombin:a reinterpretation 

      Juška, Alfonsas (BIO, 2011)
      It has been found on the basis of experimental data by Redondo and co-workers (Cell. Signal. 2008) that under the conditions of the experiments thrombin- stimulated discharge of DTS is negligible compared to that of the ...
    • Calculating method of heavy diesel engines emissions toxicity 

      Pikūnas, Alvydas; Bureika, Gintautas; Grabys, Juozapas (Journal of Kones. Internal Combustion Engines, 2005)
      The method to calculate harmful compounds of exhausts gases from Diesel engines is presented in this topic. It is believed that vehicles with internal combustion engines in European countries release about 89% of COx 52% ...
    • Calculating method of the rational parameters of wheelchair fastening to the public transportation vehicle 

      Griškevičius, Julius; Mariūnas, Mečislovas (Journal of Vibroengineering : proceedings of the 6st Lithuanian Scientific Seminar "Biomdlore -05" "Biomechanics, biomedical engineering, artificial organs, locomotion, orthopedics, rehabilitation", 2005)
    • Calculation and drawing of construction elements in engineering design 

      Sokas, Algirdas (The Journal of Polish Society for Geometry and Engineering Graphics, 2007)
      The problems of automated design system in constructions are presented in the article.Two parts of engineering design are separated: calculation (stress and strains or forces and displacements finding, calculation of useful ...
    • Calculation area of physical terrain surface, using digital surface models 

      Kumetaitienė, Aušra; Kumetaitis, Algirdas (Vagos : mokslo darbai, 2005)
      Tyrime išnagrinėtos fizinio žemės paviršiaus ploto skaičiavimo metodikos. Pasiūlytas originalaus fizinio paviršiaus ploto skaičiavimo metodas naudojant stačiakampį rastrą. Šis metodas palygintas su fizinio paviršiaus ploto ...
    • Calculation model for steel fibre reinforced concrete punching zones of bridge superstructure and foundation slabs 

      Marčiukaitis, Jonas Gediminas; Šalna, Remigijus; Jonaitis, Bronius; Valivonis, Juozas (The Baltic journal of road and bridge engineering, 2011)
      The usage of steel fibre reinforced concrete in monolithic joins is well known as a good alternative of additional reinforcement because of chaotic distribution of steel fibres in complex stress ant strain state. Unfortunately, ...
    • Calculation of cable total displacements considering complex conditions 

      Juozapaitis, Algirdas; Norkus, Arnoldas (Foundations of civil and environmental engineering, 2005)
      A deformable response of cable structures, designed according to design codes, can be described in terms of total displacements in terms of elastic and kinematic their components. The most dangerous loading case for cable ...
    • Calculation of deformation of a mobile elastic element of the hydrodynamic tilting-pad journal bearing 

      Vekteris, Vladas (Solid State Phenomena: Mechatronic Systems and Materials: a collection of papers from the 1st international conference (MSM 2005), Vilnius, Lithuania, 20-23 October 2005, 2006)
    • Calculation of dynamic parameters of analog signal's discretisator 

      Marcinkevičius, Albinas Jonas; Jasonis, Vaidas (Электроника и связь. "Проблемы электроники", 2005)
      The SHC structural models was proposed, considering non-linear character of transfer function and additive noise signal and strobe inputs allowing to made dynamic errors analysis of two regimes: linear, when signal is in ...
    • Calculation of dynamic parameters of floating up of the rotor in gas vibrobearings 

      Kanapėnas, Rimantas Mykolas (Solid State Phenomena: Mechatronic Systems and Materials: a collection of papers from the 1st international conference (MSM 2005), Vilnius, Lithuania, 20-23 October 2005, 2006)
      Floating up of the rotor in gas vibrobearings with squeezed gas vibrofilms is investigated. Individual cases of efficiency of gas vibrobearings in relation to a rotor load have been studied. A dynamic model of a self-alignment ...
    • Calculation of interpolation parameters in the comparator analog information converters 

      Marcinkevičius, Albinas Jonas; Jasonis, Vaidas (Elektronika ir elektrotechnika, 2006)
      The theoretical analysis of interpolation parameters evaluating the influence of folding circuits on the ADC speed and accuracy i; made in the paper. The analytical equations are derived and dependences of interpolation ...
    • Calculation of magnetic field in vibrating mechanical systems 

      Ragulskis, Kazimieras; Zubavičius, Leonas; Maskeliūnas, Rimas; Ragulskis, Liutauras (Journal of Vibroengineering, 2006)
      A procedure for the calculation of magnetic field in vibrating mechatronic systems is presented in this paper. The application of the procedure of conjugate approximation with smoothing is proposed for the elimination of ...
    • Calculation of Miniature Vibration - Type Slider Bearings to Reduce Friction 

      Kanapėnas, Rimantas Mykolas (Mechanika, 2001)
      Vibracinių guolinių sistemų, turinčių mechaninį vibracinį kontaktą, frikcinės ir dinaminės charakteristikos priklauso nuo kontaktinio žadinimo parametrų, virpesių formos, vibracinių smūginių režimų vibraciniame kontakte, ...
    • Calculation of optimal parameters of vibration electrode for are welding 

      Ščemeliovas, Jevgenijus (Journal of vibroengineering, 2008)
      Manual and semi-automatic welding by vibration electrode (pulsing are) is considered in the article. The advantages of welding by the pulsing arc are determined in comparison with welding by a constant arc. Using energy ...
    • Calculation of parameters of saccular aneurysm 

      Mockus, Laimonas; Martavičius, Romanas; Ušinskas, Andrius; Meilūnas, Mečislavas (Elektronika ir elektrotechnika, 2008)
      The methodology of modelling 3D aneurysm image points was suggested in the article. The ellipsoid was used for the modelling of human‘s saccular aneurysm. The spread of aneurysm image points was analysed with respect to ...