Rodyti trumpą aprašą

dc.contributor.authorPakalka, Saulius
dc.contributor.authorValančius, Kęstutis
dc.date.accessioned2023-09-18T16:09:48Z
dc.date.available2023-09-18T16:09:48Z
dc.date.issued2021
dc.identifier.issn1691-5208
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/111977
dc.description.abstractThe study presents the experimental and analytical investigation, which was carried out to evaluate the charging/discharging performance of phase change material (PCM) in the thermal energy storage (TES) unit. The experiments performed under different operating modes of the heat storage system, changing the inlet temperature and the mass flow rate of the heat transfer fluid (HTF). The calculated amount of thermal energy based on the partial enthalpy distribution provided by the manufacturer’s datasheet compared to that obtained from the experiments. Based on the experimental results, a three-dimensional response surfaces formed and a regression models obtained, which allow predicting the PCM charging and discharging performance.eng
dc.formatPDF
dc.format.extentp. 600-609
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.relation.isreferencedbyEmerging Sources Citation Index (Web of Science)
dc.relation.isreferencedbyScopus
dc.relation.isreferencedbyVINITI
dc.relation.isreferencedbyJ-Gate
dc.relation.isreferencedbyGEOBASE
dc.relation.isreferencedbyGeoRef
dc.relation.isreferencedbyGenamics Journal Seek
dc.source.urihttps://www.sciendo.com/article/10.2478/rtuect-2021-0044
dc.titleExperimental investigation and prediction of charging/discharging performance of phase change material based thermal energy storage unit
dc.typeStraipsnis Web of Science DB / Article in Web of Science DB
dcterms.accessRightsThis is an open access article licensed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0).
dcterms.licenseCreative Commons – Attribution – 4.0 International
dcterms.references18
dc.type.pubtypeS1 - Straipsnis Web of Science DB / Web of Science DB article
dc.contributor.institutionVilniaus Gedimino technikos universitetas Perspektyvinių technologijų taikomųjų tyrimų institutas
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.facultyAplinkos inžinerijos fakultetas / Faculty of Environmental Engineering
dc.subject.researchfieldT 006 - Energetika ir termoinžinerija / Energy and thermoengineering
dc.subject.researchfieldT 009 - Mechanikos inžinerija / Mechanical enginering
dc.subject.studydirectionE13 - Energijos inžinerija / Energy engineering
dc.subject.vgtuprioritizedfieldsAE0303 - Pastatų energetika / Building energetics
dc.subject.ltspecializationsL102 - Energetika ir tvari aplinka / Energy and a sustainable environment
dc.subject.enCharging/Discharging
dc.subject.enchange material (PCM)
dc.subject.enregression model
dc.subject.enresponse surface
dcterms.sourcetitleEnvironmental and climate technologies
dc.description.issueiss. 1
dc.description.volumevol. 25
dc.publisher.nameSciendo
dc.publisher.cityWarsaw
dc.identifier.doi000704919700003
dc.identifier.doi10.2478/rtuect-2021-0044
dc.identifier.elaba106791804


Šio įrašo failai

FailaiDydisFormatasPeržiūra

Su šiuo įrašu susijusių failų nėra.

Šis įrašas yra šioje (-se) kolekcijoje (-ose)

Rodyti trumpą aprašą