Show simple item record

dc.contributor.authorMazur, Tomasz
dc.contributor.authorCepova, Lenka
dc.contributor.authorSzymanski, Tomasz
dc.contributor.authorRucki, Miroslaw
dc.date.accessioned2023-09-18T16:25:21Z
dc.date.available2023-09-18T16:25:21Z
dc.date.issued2022
dc.identifier.other(WOS_ID)000857073700001
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/113726
dc.description.abstractThe paper presents the results of the investigations on the direction-dependent accuracy of the point identification during contact probe measurements with a coordinate measuring machine (CMM). Considering the contact point identified by an orthogonal to the surface probe movement, the transformation of coordinates was made in order to calculate the displacement of the measured point. As a result, the positioning accuracy was estimated in three axes. The experiments demonstrated a strong dependence of the displacement on the declination angle. Moreover, it was found that the directional surface texture which provided different roughness in perpendicular directions, had an impact on the positioning accuracy.eng
dc.formatPDF
dc.format.extentp. 1-14
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.relation.isreferencedbyScience Citation Index Expanded (Web of Science)
dc.relation.isreferencedbyScopus
dc.titleAnalysis of the planar point identification accuracy in CMM measurements
dc.typeStraipsnis Web of Science DB / Article in Web of Science DB
dcterms.accessRightsThis article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).
dcterms.licenseCreative Commons – Attribution – 4.0 International
dcterms.references32
dc.type.pubtypeS1 - Straipsnis Web of Science DB / Web of Science DB article
dc.contributor.institutionKazimierz Pulaski University of Technology and Humanities in Radom
dc.contributor.institutionVSB-Technical University of Ostrava
dc.contributor.institutionMitutoyo Polska
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.facultyMechanikos fakultetas / Faculty of Mechanics
dc.contributor.departmentMechanikos mokslo institutas / Institute of Mechanical Science
dc.subject.researchfieldT 009 - Mechanikos inžinerija / Mechanical enginering
dc.subject.studydirectionE06 - Mechanikos inžinerija / Mechanical engineering
dc.subject.vgtuprioritizedfieldsMC0101 - Mechatroninės gamybos sistemos Pramonė 4.0 platformoje / Mechatronic for Industry 4.0 Production System
dc.subject.ltspecializationsL104 - Nauji gamybos procesai, medžiagos ir technologijos / New production processes, materials and technologies
dc.subject.encoordinate measuring machine
dc.subject.enprecision metrology
dc.subject.enaccuracy
dc.subject.enprobing point
dc.subject.enerror minimization
dcterms.sourcetitleSensors
dc.description.issueiss. 18
dc.description.volumevol. 22
dc.publisher.nameMDPI
dc.publisher.cityBasel
dc.identifier.doi000857073700001
dc.identifier.doi2-s2.0-85138336803
dc.identifier.doi85138336803
dc.identifier.doi1
dc.identifier.doi140696284
dc.identifier.doi10.3390/s22187005
dc.identifier.elaba141873691


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record