Rodyti trumpą aprašą

dc.contributor.authorNickelson, Liudmila
dc.contributor.authorBubnelis, Artūras
dc.contributor.authorNavickas, Romualdas
dc.contributor.authorBaškys, Algirdas
dc.contributor.authorBučinskas, Juozas
dc.date.accessioned2023-09-18T16:39:40Z
dc.date.available2023-09-18T16:39:40Z
dc.date.issued2016
dc.identifier.issn0920-5071
dc.identifier.other(BIS)VGT02-000032507
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/115594
dc.description.abstractThe electric and magnetic field distributions as well as the dispersion characteristics of open cylindrical tube (hollow-core) waveguides are analysed in this work. The analysed waveguides are made of an onion-like carbon (OLC) material. The solution of the boundary problem was fulfilled by the partial area method. It was discovered the very complicated dependencies of the phase and attenuation constants on the waveguide radii. Such dependencies arise because the OLC material is the highly dispersive and absorbing one. The fundamental and four higher modes can propagate in our investigated waveguides. We have analysed the high-frequency cut-off frequency of modes that is dependent on the tube waveguide external radius. The certain electromagnetic (EM) mode can propagate only on the frequencies lower than the mentioned cut-off frequency. For this reason, this cut-off frequency has an important use in practical applications. We presented here the EM field distributions of modes. We discovered that it is possible to reach the one-mode regime of OLC tube waveguide at the certain external radius. The fundamental and first higher modes’ EM energy is concentrated in the OLC material between the internal and external surfaces of the waveguide.eng
dc.formatPDF
dc.format.extentp. 1661-1669
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.relation.isreferencedbyMathSciNet
dc.relation.isreferencedbyScopus
dc.relation.isreferencedbyINSPEC
dc.relation.isreferencedbyTaylor & Francis (nenaudotinas)
dc.relation.isreferencedbyScience Citation Index Expanded (Web of Science)
dc.source.urihttp://www.tandfonline.com/doi/pdf/10.1080/09205071.2016.1208117?needAccess=true
dc.subjectFM03 - Fizinių, technologinių ir ekonominių procesų matematiniai modeliai ir metodai / Mathematical models and methods of physical, technological and economic processes
dc.titleElectromagnetic analysis of the main and higher modes on the onion-like carbon tubes
dc.typeStraipsnis Web of Science DB / Article in Web of Science DB
dcterms.references14
dc.type.pubtypeS1 - Straipsnis Web of Science DB / Web of Science DB article
dc.contributor.institutionValstybinis mokslinių tyrimų institutas Fizinių ir technologijos mokslų centras Vilniaus Gedimino technikos universitetas
dc.contributor.institutionValstybinis mokslinių tyrimų institutas Fizinių ir technologijos mokslų centras
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.institutionVilniaus universitetas
dc.contributor.facultyElektronikos fakultetas / Faculty of Electronics
dc.subject.researchfieldT 001 - Elektros ir elektronikos inžinerija / Electrical and electronic engineering
dc.subject.ltspecializationsL104 - Nauji gamybos procesai, medžiagos ir technologijos / New production processes, materials and technologies
dc.subject.enComplex propagation constant
dc.subject.enElectric and magnetic fields distribution
dc.subject.enWaveguides
dc.subject.enPartial area method
dc.subject.enOnion-like carbon
dc.subject.enHigh-frequency cut-off frequency
dc.subject.enMain and higher modes
dcterms.sourcetitleJournal of electromagnetic waves and applications
dc.description.issueno. 13
dc.description.volumeVol. 30
dc.publisher.nameTaylor & Francis
dc.publisher.cityOxon
dc.identifier.doi000382887600001
dc.identifier.doi10.1080/09205071.2016.1208117
dc.identifier.elaba17133919


Šio įrašo failai

FailaiDydisFormatasPeržiūra

Su šiuo įrašu susijusių failų nėra.

Šis įrašas yra šioje (-se) kolekcijoje (-ose)

Rodyti trumpą aprašą