Show simple item record

dc.contributor.authorVaitkus, Audrius
dc.contributor.authorVorobjovas, Viktoras
dc.contributor.authorŠernas, Ovidijus
dc.contributor.authorŠkulteckė, Judita
dc.contributor.authorTumavičė, Aja
dc.contributor.authorKleizienė, Rita
dc.date.accessioned2023-09-18T16:40:36Z
dc.date.available2023-09-18T16:40:36Z
dc.date.issued2016
dc.identifier.issn2225-9082
dc.identifier.other(BIS)VGT02-000032533
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/115860
dc.description.abstractAsphalt wearing layer is considered as the most popular solution in design of pavement structure. However, the performance of asphalt strongly relies on both loading and climatic conditions. The loading type and time, gross weight, contact area and pressure onto pavement are the main factors influencing asphalt performance. Analysing climatic conditions, there is emphasized the effect of temperature. The temperature increases, the stiffness of asphalt decreases. The worst situation is in heavy duty areas, where dominates high pressure onto pavement. All these factors induce high shear stresses in asphalt wearing layer and results in imprinted and shoved part of it (in contact area). Consequently, premature failures are observed in asphalt pavements within the first few years after road opening. In order to prevent it, there is given the algorithm for selection of asphalt mixture resistant to plastic deformation.eng
dc.format.extentp. 36-42
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.source.urihttp://www.beldornii.by/company/publications/~show/29410
dc.subjectSD03 - Pažangios statybinės medžiagos, statinių konstrukcijos ir technologijos / Innovative building materials, structures and techniques
dc.titleThe algorithm for selection of asphalt mixture resistant to plastic deformation
dc.typeStraipsnis kitame recenzuotame leidinyje / Article in other peer-reviewed source
dcterms.references53
dc.type.pubtypeS4 - Straipsnis kitame recenzuotame leidinyje / Article in other peer-reviewed publication
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.facultyAplinkos inžinerijos fakultetas / Faculty of Environmental Engineering
dc.contributor.departmentKelių tyrimo institutas / Road Research Institute
dc.subject.researchfieldT 002 - Statybos inžinerija / Construction and engineering
dc.subject.ltspecializationsL104 - Nauji gamybos procesai, medžiagos ir technologijos / New production processes, materials and technologies
dc.subject.ltspecializationsC101 - Civilinės inžinerijos mokslo centras /
dcterms.sourcetitleАвтомобильные дороги и мосты: научно-технический журнал / Министерство транспорта и коммуникаций Республики Беларусь, Белорусский дорожный научно-исследовательский институт
dc.description.issue№ 1(17)
dc.publisher.nameРУП "БелдорНИИ"
dc.publisher.cityМинск
dc.identifier.elaba17190874


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record