Show simple item record

dc.contributor.authorDilys, Justas
dc.contributor.authorStankevič, Voitech
dc.date.accessioned2023-09-18T16:40:37Z
dc.date.available2023-09-18T16:40:37Z
dc.date.issued2022
dc.identifier.other(SCOPUS_ID)85162955881
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/115864
dc.description.abstractAn accurate stator resistance and inductance are necessary for high-performance permanent magnet synchronous motor (PMSM) control. The stator resistance and inductance can be estimated during motor standstill op-eration. This study proposes a standstill estimation method for the determination of dq-axis inductances and resistance of a PMSM drive system fed by a conventional voltage source inverter (VSI). The proposed method estimates both inductance and the rotor’s position using the same algorithm, and knowl-edge of its initial position is not required. The d-and q-axis inductances were estimated by applying three short-time voltage pulses and measuring phase current peak values. The stator’s resistance is estimated by monitoring the exponential decay process of the direct axis current. The method was verified by simulation and experiments conducted on two different PM synchronous motors. A good agreement of simulation and experimental results was ob-tained. Moreover, the proposed method is relatively simple and can identify stator resistance and inductance at any motor load condition. Compared to the existing parameter estimation strategies, the proposed estimation scheme has a relatively faster estimation time. Additionally, it is shown that the method accounts for the dead-time effect as well.eng
dc.formatPDF
dc.format.extentp. 477-491
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.relation.isreferencedbyScopus
dc.relation.isreferencedbyDimensions
dc.titleA simple method for stator inductance and resistance estimation for PMSM at standstill
dc.typeStraipsnis Scopus DB / Article in Scopus DB
dcterms.licenseCreative Commons – Attribution – 4.0 International
dcterms.references27
dc.type.pubtypeS2 - Straipsnis Scopus DB / Scopus DB article
dc.contributor.institutionValstybinis mokslinių tyrimų institutas Fizinių ir technologijos mokslų centras Vilniaus Gedimino technikos universitetas
dc.contributor.facultyElektronikos fakultetas / Faculty of Electronics
dc.subject.researchfieldT 001 - Elektros ir elektronikos inžinerija / Electrical and electronic engineering
dc.subject.vgtuprioritizedfieldsAE0101 - Efektyvus išteklių ir energijos naudojimas / Efficient use of resources and energy
dc.subject.ltspecializationsL102 - Energetika ir tvari aplinka / Energy and a sustainable environment
dc.subject.endq inductances
dc.subject.enPMSM
dc.subject.enResistance
dc.subject.enStandstill
dcterms.sourcetitleInternational journal of robotics and control systems
dc.description.issueiss. 3
dc.description.volumevol. 2
dc.publisher.nameAssociation for Scientific Computing Electronics and Engineering (ASCEE)
dc.publisher.cityYogyakarta
dc.identifier.doi2-s2.0-85162955881
dc.identifier.doi85162955881
dc.identifier.doi1
dc.identifier.doi142230901
dc.identifier.doi10.31763/ijrcs.v2i3.741
dc.identifier.elaba171868962


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record