Show simple item record

dc.contributor.authorGnip, Ivan
dc.contributor.authorVaitkus, Saulius
dc.contributor.authorKeršulis, Vladislovas
dc.contributor.authorVėjelis, Sigitas
dc.date.accessioned2023-09-18T19:17:44Z
dc.date.available2023-09-18T19:17:44Z
dc.date.issued2008
dc.identifier.issn0142-9418
dc.identifier.other(BIS)VGT02-000025262
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/137589
dc.description.abstractThe results obtained in investigating the creep of expanded polystyrene (EPS) boards under compressive stress are presented. Power and exponential equations were used for describing creep compliance. It was found that the curves of creep compliance approximated by both equations adequately represent the research results, taking into account the scatter of the experimental data. Based on the calculation and empirical estimate of long-term creep of EPS under compressive stress σc=(0.25–0.45)σ10%, its creep compliance Ic(T=10) was determined for a period of 10 years in the future. The dependence of Ic(T = 10) on the density of polystyrene boards and the value of long-term compressive stress σc was established. The expected values of creep strain [...](T=10) development in expanded polystyrene boards EPS 80–EPS 250 under constant compressive stress σc=(0.25–0.45)sσ10%, are presented for the prediction period of 10 years. To obtain the expected creep values for any other period of time in the interval of 5<T<50 years, the values of [...](T=10) should be multiplied by the empirical coefficient [...].eng
dc.formatPDF
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.relation.isreferencedbyScienceDirect
dc.relation.isreferencedbyScience Citation Index Expanded (Web of Science)
dc.source.urihttp://www.sciencedirect.com/science/article/pii/S0142941808000147#
dc.titleLong-term prediction of compressive creep development in expanded polystyrene
dc.typeStraipsnis Web of Science DB / Article in Web of Science DB
dcterms.references23
dc.type.pubtypeS1 - Straipsnis Web of Science DB / Web of Science DB article
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.facultyTermoizoliacijos mokslo institutasui-button / Scientific Institute of Thermal Insulationui-button
dc.subject.researchfieldT 008 - Medžiagų inžinerija / Material engineering
dc.subject.enExpanded polystyrene (EPS)
dc.subject.enLong-term compression
dc.subject.enCreep compliance
dc.subject.enAnalytical description
dc.subject.enCreep strain
dc.subject.enPrediction
dcterms.sourcetitlePolymer testing
dc.description.issueiss. 3
dc.description.volumeVol. 27
dc.publisher.nameElsevier
dc.publisher.cityOxford
dc.identifier.doi10.1016/j.polymertesting.2008.01.005
dc.identifier.elaba3996588


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record