Rodyti trumpą aprašą

dc.contributor.authorMažeika, Dalius
dc.contributor.authorČeponis, Andrius
dc.contributor.authorBorodinas, Sergejus
dc.contributor.authorJūrėnas, Vytautas
dc.contributor.authorKulvietis, Genadijus
dc.date.accessioned2023-09-18T20:14:38Z
dc.date.available2023-09-18T20:14:38Z
dc.date.issued2019
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/148099
dc.description.abstractNumerical and experimental investigations of a novel design multi-modal piezoelectric traveling wave actuator are presented. The actuator composes aluminum cylindrical stator with inner conical cavity and piezo ceramic rings located at the node of the first longitudinal vibration mode of the actuator and the bottom of the actuator. Actuator is clamped using bolt that is fixed at the bottom of the cylinder. Operation principle of the actuator is based on a superposition of the first longitudinal and second bending modes of the stator. Conical cavity in the cylinder is used to amplify vibration amplitudes of the contacting surface. Four electric signals with phase difference by π/2 are used to drive actuator. Results of numerical and experimental investigations are in good agreement.eng
dc.format.extentp. 247-248
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.source.urihttps://iwpma2019.sciencesconf.org/
dc.titleA cylinder type multimodal traveling wave piezoelectric actuator
dc.typeKitos konferencijų pranešimų santraukos / Other conference presentation abstracts
dcterms.accessRightsThis project has received funding from the European Regional Development Fund (project No 01.2.2-LMT-K-718-01-0010) under a grant agreement with the Research Council of Lithuania.
dcterms.references6
dc.type.pubtypeT3 - Kitos konferencijos pranešimo tezės / Other conference presentation abstracts
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.institutionKauno technologijos universitetas
dc.contributor.facultyFundamentinių mokslų fakultetas / Faculty of Fundamental Sciences
dc.contributor.facultyStatybos fakultetas / Faculty of Civil Engineering
dc.subject.researchfieldT 009 - Mechanikos inžinerija / Mechanical enginering
dc.subject.vgtuprioritizedfieldsMC0101 - Mechatroninės gamybos sistemos Pramonė 4.0 platformoje / Mechatronic for Industry 4.0 Production System
dc.subject.ltspecializationsL104 - Nauji gamybos procesai, medžiagos ir technologijos / New production processes, materials and technologies
dc.subject.enpriezoelectric actuator
dc.subject.entraveling wave
dc.subject.enmulti degree of freedom
dcterms.sourcetitleInternational workshop on piezoelectric materials and applications in actuators 2019 & ENHANCE workshop, October 1st-4th 2019, Lyon, France
dc.publisher.nameUniversité de Lyon
dc.publisher.cityLyon
dc.identifier.elaba42396004


Šio įrašo failai

FailaiDydisFormatasPeržiūra

Su šiuo įrašu susijusių failų nėra.

Šis įrašas yra šioje (-se) kolekcijoje (-ose)

Rodyti trumpą aprašą