Show simple item record

Calculations on enhancement of polycrystalline diamond bits through addition of superhard diamond-reinforced elements /

dc.contributor.authorRatov, Boranbay,
dc.contributor.authorRucki, Miroslaw,
dc.contributor.authorFedorov, Boris,
dc.contributor.authorHevorkian, Edvin,
dc.contributor.authorSiemiatkowski, Zbigniew,
dc.contributor.authorMuratova, Samal,
dc.contributor.authorOmirzakova, Elmira,
dc.contributor.authorKuttybayev, Aidar,
dc.contributor.authorMechnik, Vladimir,
dc.contributor.authorBondarenko, Nikolai,
dc.date.accessioned2023-12-22T07:04:49Z
dc.date.available2023-12-22T07:04:49Z
dc.date.issued2023.
dc.identifier.other(SCOPUS_ID)85153759265
dc.identifier.urihttps://etalpykla.vilniustech.lt/xmlui/handle/123456789/153463
dc.description.abstractThe paper is dedicated to the enhancement of Polycrystalline Diamond Bits (PDC) designed for oil and gas industry. A novel diamond-reinforced composite was applied for cutting inserts, with the addition of 4 wt% chromium diboride to the WC-Co matrix. The addition of CrB2 ensured improvement of bending strength and fracture toughness by nearly 30% and 40%, respectively, and enhanced the diamond retention force. The efficiency of PDC bits was further improved by incorporating constructional features in both bottomhole and reaming parts. An analytical relationship between the feeding speed and geometrical parameters was found, including the wings and calibrating inserts numbers, as well as the rotational speed of the cutter. Under the conditions of rock fracture by reaming inserts, the approximate value of the required power was calculated.eng
dc.formatPDF
dc.format.extentp. 1-15.
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.relation.isreferencedbyScience Citation Index Expanded (Web of Science)
dc.relation.isreferencedbyScopus
dc.titleCalculations on enhancement of polycrystalline diamond bits through addition of superhard diamond-reinforced elements /
dc.typeStraipsnis Web of Science DB / Article in Web of Science DB
dcterms.accessRightsThis article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).
dcterms.licenseCreative Commons – Attribution – 4.0 International
dcterms.references45
dc.type.pubtypeS1 - Straipsnis Web of Science DB / Web of Science DB article
dc.contributor.institutionK. Satbayev Kazakh National Technical University
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.institutionKazimierz Pulaski University of Technology and Humanities in Radom
dc.contributor.institutionCaspian University
dc.contributor.institutionV. Bakul Institute for Superhard Materials of the Nationa Academy of Sciences of Ukraine
dc.contributor.facultyMechanikos fakultetas / Faculty of Mechanics
dc.contributor.departmentMechanikos mokslo institutas / Institute of Mechanical Science
dc.subject.researchfieldT 009 - Mechanikos inžinerija / Mechanical enginering
dc.subject.vgtuprioritizedfieldsMC0101 - Mechatroninės gamybos sistemos Pramonė 4.0 platformoje / Mechatronic for Industry 4.0 Production System
dc.subject.ltspecializationsL103 - Įtrauki ir kūrybinga visuomenė / Inclusive and creative society
dc.subject.enmining
dc.subject.enwell drilling
dc.subject.enPolycrystalline Diamond Bits
dc.subject.enPDC bit design
dc.subject.endrilling efficiency
dcterms.sourcetitleMachines: Cutting Tools: Materials, Development and Performance.
dc.description.issueiss. 4
dc.description.volumevol. 11
dc.publisher.nameMDPI
dc.publisher.cityBasel
dc.identifier.doi2-s2.0-85153759265
dc.identifier.doi85153759265
dc.identifier.doi1
dc.identifier.doi146716654
dc.identifier.doi000977463800001
dc.identifier.doi10.3390/machines11040453
dc.identifier.elaba164830768


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record