Crosstalk reduction in high-density radio frequency printed circuit boards: Leveraging FR4 coating layers

Abstract

The escalating component density in radio frequency (RF) systems presents a growing challenge related to the coupling of adjacent microstrip lines in high-density printed circuit boards (PCBs). As a result, to tackle this prominent issue, there is a continuous pursuit of innovative techniques to effectively minimize the coupling effects among closely spaced microstrip lines. This paper proposes a reduction in the coupling of adjacent lines by utilizing a coating (stiffener) layer, which is commonly used in rigid-flex PCB fabrication. For this purpose, a reference 50 Ohm coupled line performance was compared to three coupled lines with track widths of 1.39 mm, 1.30 mm, and 1.25 mm, respectively, all at a fixed distance between the tracks. These decreasing widths were used to achieve the same 50 Ohm impedance for the coupled lines when covered with different coating layers. Each of these three coupled lines was covered with different coating (stiffener) layers, measuring 0.1 mm, 0.3 mm, and 0.5 mm in thickness, respectively. The manufactured device under test (DUT) structures underwent time-domain reflectometry (TDR) and S-parameter measurements. The TDR measurements of the DUT structures with coating layers demonstrated excellent conformity to the 50 Ohm reference coupled line. Meanwhile, the S21 measurements indicated a significant decrease in the crosstalk. For example, for a coating layer thickness of 0.3 mm, the crosstalk decreased by approximately 5–6 dB within the frequency range up to 5 GHz. When the coating layer thickness was 0.5 mm, the crosstalk decreased by approximately 10 dB or more.