Konstrukcinio S355 ir duplex 1.4462 plienų suvirinamumo tyrimas
Abstract
Baigiamajame magistro darbe nagrinėjama konstrukcinio mažaanglio plieno S355 ir duplex plieno 1.4462 virintinės jungties suvirinamumas, tyrimui naudojant 3 skirtingas pridėtines medžiagas ir skirtingus plokštelių briaunų paruošimus. Tyrimą atliekant ardomosios ir neardomosios kontrolės metodais. Buvo išmatuotos deformacijos po suvirinimo, atlikta apžiūrimoji kontrolė, atlikta skvarbiųjų dažalų kontrolė, makrostruktūros tyrimas, kietumo matavimas. Gauti tyrimų rezultatai, nubraižyti priklausomybių grafikai ir pateiktos išvados. Darbą sudaro: įvadas, literatūros apžvalga, tyrimo metodai, rezultatų analizė, tyrimo rezultatai, išvados, literatūros sąrašas. The final master's thesis examines the weldability of the welded joint of structural low-carbon steel S355 and duplex steel 1.4462, using 3 different additive materials and different plate edge preparations. Investigating by destructive and non-destructive control methods. Deformations after welding were measured, visual control was performed, control of penetrating dyes was performed, macrostructure study, hardness measurement was performed. Research results were obtained, dependency graphs were drawn, and conclusions were presented. The work consists of introduction, literature review, research methods, analysis of results, research results, conclusions, bibliography.