Rodyti trumpą aprašą

dc.contributor.authorJuknelevičius, Romualdas
dc.date.accessioned2023-09-18T16:24:55Z
dc.date.available2023-09-18T16:24:55Z
dc.date.issued2022
dc.identifier.issn2199-8973
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/113539
dc.description.abstractThe manuscript presents the investigation on co-combustion of biomass based biofuels with hydrogen in compression ignition engine. Hydrogen fraction in the range from 0 to 40% by energy was examined. The main target was to determine the impact of hydrogen on the exhaust opacity and toxic emissions in the CI engine. The investigation was performed on a single cylinder compression ignition engine with common rail injection. Hydrogen was injected into the intake manifold, where homogeneous mixture with air was composed before sucked into the cylinder. Tests were performed at both fixed and optimal injection timings at partial and full engine load. Results of the experiments show that increasing amounts of hydrogen contributes the shorten ignition delay time that also affect main combustion phase. Additionally, it implicates heat release rate and decrease of CO, CO2, HC and exhaust opacity with increase of hydrogen energy fraction. The optimal hydrogen energy fraction of 13 – 17% was defined with respect to NO emissions, while the range of 20 – 25% is more favorable considering all exhaust emissions and engine performance.eng
dc.format.extentp. 69-79
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.rightsLaisvai prieinamas internete
dc.source.urihttps://fad-diesel.de/event/19-fad-konferenz-herausforderung-abgasnachbehandlung-copy/
dc.source.urihttps://talpykla.elaba.lt/elaba-fedora/objects/elaba:148570444/datastreams/MAIN/content
dc.titleExhaust emissions at the co-combustion of biomass-based biofuels and hydrogen in a compression ignition engine
dc.typeStraipsnis recenzuotame konferencijos darbų leidinyje / Paper published in peer-reviewed conference publication
dcterms.references11
dc.type.pubtypeP1d - Straipsnis recenzuotame konferencijos darbų leidinyje / Article published in peer-reviewed conference proceedings
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.facultyMechanikos fakultetas / Faculty of Mechanics
dc.subject.researchfieldT 001 - Elektros ir elektronikos inžinerija / Electrical and electronic engineering
dc.subject.researchfieldT 009 - Mechanikos inžinerija / Mechanical enginering
dc.subject.vgtuprioritizedfieldsTD0202 - Aplinką tausojantis transportas / Environment-friendly transport
dc.subject.ltspecializationsL106 - Transportas, logistika ir informacinės ir ryšių technologijos (IRT) / Transport, logistic and information and communication technologies
dc.subject.enHydrogen
dc.subject.enRME
dc.subject.enHVO
dc.subject.endiesel fuel
dc.subject.enCI engine
dc.subject.encombustion
dc.subject.enemission
dcterms.sourcetitle19. FAD-Konferenz "Herausforderung - Abgasnachbehandlung". Beitrage 3.11-4.11.2022 in Dresden
dc.publisher.nameFörderkreis Abgasnachbehandlungstechnologien für Verbrennungskraftmaschinen (FAD) e.V.
dc.publisher.cityDresden
dc.identifier.elaba148570444


Šio įrašo failai

Thumbnail

Šis įrašas yra šioje (-se) kolekcijoje (-ose)

Rodyti trumpą aprašą