Now showing items 1-20 of 15192

    • Layer interface behaviour in layered concrete structural elements / 

      Masėnas, Juozas,; Valivonis, Juozas, (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania., 2024.)
      Layered concrete structures provide many benefits in construction of a new project and repair, strengthening of already existing structures. However, this type of structural member has a vulnerable point, which is the ...
    • Comparative review on integration levels between design and analysis systems / 

      Popov, Vladimir,; Grigorjeva, Eva,; Grigorjeva, Tatjana,; Anciūtė, Alvyda, (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania., 2024.)
      Building design is a broad and intensive collaborative process that involves a multitude of tasks and responsibilities that need to be accomplished in a timely and qualitative manner. The design process has a clearly ...
    • Selection of an optimum axially compressed closed cross-section thin-walled built-up column / 

      Stulpinas, Mantas,; Daniūnas, Alfonsas, (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania., 2024.)
      This article focuses on the analysis of axially compressed thin-walled built-up closed cross-section columns. The built-up nature of the cross-section is carefully considered in the calculation procedures and optimization ...
    • Prediction of ultimate bearing capacities of test piles according to different methods / 

      Sližytė, Danutė,; Urbonas, Kęstutis,; Mackevičius, Rimantas, (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania., 2024.)
      In modern construction, piles are often used due to their environmental friendliness and their ability to withstand large loads. However, different calculation methods are used in their design, which is suitable for specific ...
    • The metakaolin waste effect on the physical and mechanical properties of high-performance concrete 

      Malaiškienė, Jurgita; Boris, Renata; Antonovič, Valentin; Gribniak, Viktor; Stonys, Rimvydas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      This paper discusses the structure and properties of high-performance concrete (HPC) analysed by scanning electron microscopy, X-ray diffraction analysis, exothermic temperature, density, bending, and compressive strength. ...
    • Impact of modified biopolymer on properties of clay composites 

      Trambitski, Yahor; Kizinievič, Olga; Kizinievič, Viktor (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      This research investigates the impact of a modified biopolymer, retrograded corn starch, on the physical-mechanical and hygroscopic properties of clay composites. Clay composites were produced using varying amounts of the ...
    • Construction of a high-rise building near sensitive infrastructures and the resulting soil-structure interaction 

      Seip, Matthias; Hassan, Mohamed; Katzenbach, Rolf; Leppla, Steffen; Norkus, Arnoldas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      Between two banks of the River Main in Frankfurt, Germany, a new high-rise building is planned with a challenging structural concept. The geotechnical boundary conditions, such as the location of the building, nearby ...
    • Numerical analysis of prestressing strand placement impact on dapped-end beam bearing capacity 

      Masėnas, Vilius; Valivonis, Juozas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      Dapped-end beams, prevalent in structural design for their distinct advantages, pose unique challenges when integrating prestressed reinforcement. The geometric discontinuities in these beams result in complex stress ...
    • Selection of technology for the reconstruction of masonry walls of heritage buildings 

      Markauskas, Edvinas; Šaparauskas, Jonas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      Cultural heritage is a characteristic feature of every country that tells about the past. A country seeking to preserve its history must respect, protect and restore cultural heritage objects: buildings, monuments, historical ...
    • Research on a composite micro-hose subjected to harmonic loading. Experimental approach 

      Stosiak, Michał; Przybylak, Łukasz; Deptuła, Adam; Karpenko, Mykola; Urbanowicz, Kamil; Skačkauskas, Paulius (Advances in Hydraulic and Pneumatic Drives and Control: International Scientific-Technical Conference on Hydraulic and Pneumatic Drives and Control NSHP 2023, held on October 11-13, 2023, in Piechowice, Poland, 2024)
      The article presents an original test rig for investigating the dynamic and static properties of hydraulic hoses. A composite micro-hydraulic hose with an inner diameter of 2 mm was taken as the test object. To carry out ...
    • Development of timber construction in European countries: Drivers, barriers, and education 

      Tupėnaitė, Laura; Kanapeckienė, Loreta; Naimavičienė, Jurga (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      For all of the European Union countries, the European Green Deal has set ambitious objectives to become climate neutral by 2050. The global challenge is to achieve prosperity and sustainable economic development while ...
    • Energy–saving in hydraulic drives in experimental approach and biomimetric similarity 

      Karpenko, Mykola; Stosiak, Michał; Prentkovskis, Olegas; Skačkauskas, Paulius (Advances in Hydraulic and Pneumatic Drives and Control: International Scientific-Technical Conference on Hydraulic and Pneumatic Drives and Control NSHP 2023, held on October 11-13, 2023, in Piechowice, Poland, 2024)
      The current article presents the research results of the proposed energy-saving way in hydraulic drives based on a biomimetic approach. Experimental measuring for investigation energy consumption by different types of ...
    • Effects of overall satisfaction with PV Systems and subsidy policy on energy security for rooftop buildings using system dynamics 

      Al-Refaie, Abbas; Lepkova, Natalija (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      A significant amount of the electricity needed to operate units of residential buildings can be generated from rooftop PV systems. This study developed system dynamics models to assess the impact of the overall satisfaction ...
    • Stabilization of soil using polyurethane resin injection technology 

      Dirgėlienė, Neringa; Kordušas, Valdas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      The use of ground improvement technology, specifically soil injection using polyurethane resin, has gained significant attention in the construction industry for foundation sediments. This technique offers various applications ...
    • Decision support systems in construction: A bibliometric analysis 

      Kalibatas, Darius; Kalibatienė, Diana (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      With the development of information technologies, they have been penetrating into a variety of construction activities, thus changing them. One such innovation that is changing the construction field is Decision Support ...
    • Flexural strength evaluation of reinforced one-way concrete slab with plastic voided inserts 

      Zavalis, Mindaugas; Valivonis, Juozas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      Experimental tests of bending reinforced concrete slab have shown that flexural strength of reinforced concrete voided slab with hollow plastic inserts is lower than flexural strength of continuous cross section slabs ...
    • Pricing and construction contract type selection model 

      Vilkonis, Arvydas; Antuchevičienė, Jurgita; Kutut, Vladislavas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      Choosing the pricing of a construction project and the type of construction contract from the perspective of customers is a responsible and complex process. The success of a construction project depends on the correct ...
    • Remains of Gediminas Castle hill (Vilnius, Lithuania): 3D numerical model behaviour 

      Skuodis, Šarūnas; Daugevičius, Mykolas; Medzvieckas, Jurgis; Šneideris, Arnoldas; Jokūbaitis, Aidas; Rastenis, Justinas; Valivonis, Juozas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania / J.A.O. Barros, G. Kaklauskas, E.K. Zavadskas (eds), 2024)
      This manuscript represents a historical influence of Gediminas Hill constructions and buildings for nowadays condition. According to latest investigations realized in 2019–2020 and obtained results, it was prepared ...
    • Properties of biomass fly ash-phosphogypsum based pastes 

      Zhu, Chengjie; Pundienė, Ina; Pranckevičienė, Jolanta; Kligys, Modestas (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      Biomass fly ash (BFA) and phosphogypsum (PG) are by-products of wood biomass combustion in thermal power plants and phosphoric acid production. PG is formed during the decomposition of phosphate raw materials by sulfuric ...
    • Evaluation of suspended veneer façade criteria at the construction stage 

      Migilinskas, Darius; Zigmund, Viačeslav; Antuchevičienė, Jurgita (Modern Building Materials, Structures and Techniques MBMST 2023, 5-6 October, Vilnius, Lithuania, 2024)
      Construction uses different innovative solutions and advanced technologies to increase effectiveness, safety assessment, site preparation, logistic, save resources, reduce waste and reworks. One of the ways to find the ...