Show simple item record

dc.contributor.authorSkripkin, Vitalij
dc.contributor.authorŠvagždytė, Ieva
dc.contributor.authorMokšin, Vadim
dc.date.accessioned2023-09-18T16:34:24Z
dc.date.available2023-09-18T16:34:24Z
dc.date.issued2023
dc.identifier.issn1583-7904
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/115097
dc.description.abstractThis article analyzes the influence of polishing speed (rotational speed of the pad), pressing force, and process duration on surface flatness deviation and surface roughness during polishing of flat optical parts made of Suprasil(R) material. Experimental investigations were carried out using the Taguchi L9 experimental design, shape deviation and surface roughness parameters were measured, and the obtained results were processed using statistical processing software. It has been found that increasing the rotational speed of the pad and pressing force allows one to obtain a smoother surface, deviations from the flatness decreases as the rotational speed of the polishing pad increased.eng
dc.formatPDF
dc.format.extentp. 91-96
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.relation.isreferencedbyScopus
dc.source.urihttps://www.ajme.ro/PDF_AJME_2023_1/L12.pdf
dc.source.urihttps://www.ajme.ro/index.php
dc.titleExperimental investigation of machining parameters in polishing optical parts made of Suprasil
dc.typeStraipsnis Scopus DB / Article in Scopus DB
dcterms.references12
dc.type.pubtypeS2 - Straipsnis Scopus DB / Scopus DB article
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.facultyMechanikos fakultetas / Faculty of Mechanics
dc.subject.researchfieldT 009 - Mechanikos inžinerija / Mechanical enginering
dc.subject.vgtuprioritizedfieldsFM0101 - Fizinių, technologinių ir ekonominių procesų matematiniai modeliai / Mathematical models of physical, technological and economic processes
dc.subject.ltspecializationsL104 - Nauji gamybos procesai, medžiagos ir technologijos / New production processes, materials and technologies
dc.subject.encutting data
dc.subject.enoptical parts
dc.subject.ensurface quality
dc.subject.enpolishing
dc.subject.enSuprasil
dcterms.sourcetitleAcademic journal of manufacturing engineering
dc.description.issueiss. 1
dc.description.volumevol. 21
dc.publisher.nameEditura Politehnica
dc.publisher.cityTimisoara
dc.identifier.elaba160253076


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record