Porous permeable high-alumina ceramic materials for macro- and microfiltration
Santrauka
Designed composition of ceramic mass for high-alumina porous permeable ceramic material for disperse micro hydro systems. The filler used alumina fraction 100–250 microns, as a binder system studied refractory clay Veselovskaya–medicalglass–gibbsite. Formation of material carried by dry pressing at a pressure 60 MPa, the temperature of synthesis was 1250–1350 °C, holding at the maximum temperature – 1 h. The processes occurring in the binder during sintering was investigated. The effect of the sintering temperature of the material, the amount of binder composition on the acid resistance, mechanical strength, porosity and permeability of open high-alumina permeable porous material was investigated. The structure and phase composition of the submissions received, the average pore diameter was 10 mm, it can be used for microfiltration of liquids and gases, the material is homogeneous at the macro level, the structure is represented by an extensive network of channels of pores. Phase composition is represented mainly corundum and mullite. The material has the following set of physico-chemical properties: open porosity 46.41–49.74%, acid resistance 99.24–99,65%, mechanical strength in compression 6.41–12.53 MPa, permeability 5.32·10–8 m2.