Rodyti trumpą aprašą

dc.contributor.authorRimkus, Alfredas
dc.contributor.authorMelaika, Mindaugas
dc.contributor.authorMatijošius, Jonas
dc.contributor.authorMikaliūnas, Šarūnas
dc.contributor.authorPukalskas, Saugirdas
dc.date.accessioned2023-09-18T16:42:48Z
dc.date.available2023-09-18T16:42:48Z
dc.date.issued2016
dc.identifier.other(BIS)VGT02-000032655
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/116252
dc.description.abstractIn this study, spark ignition engine fuelled with buthanol-petrol mixture and a hydrogen-enriched air was investigated. Engine combustion characteristics were investigated with different buthanol (10 % and 20 % by volume) petrol mixtures and additionally supplied oxygen and hydrogen (HHO) gas mixture (3.6 l/min) in the sucked air. HHO gas improves petrol and petrol–buthanol mixture combustion and increases indicated pressure during combustion phase. Buthanol addition decreases rate of heat release, the combustion temperature and pressure are lower which have an influence on lower nitrous oxide (NOx) emission in exhaust gases. Combustion process analysis was carried out using AVL BOOST software. Experimental research and combustion process numerical simulation showed that using balanced buthanol and hydrogen addition, optimal efficient and ecological parameters could be achieved when engine is working with optimal spark timing as it would work on petrol fuel.eng
dc.format.extentp. 6-10
dc.format.mediumtekstas / txt
dc.language.isoeng
dc.subjectTD01 - Energiją ir aplinką tausojančios transporto priemonės / Energy saving and environment-friendly transport means
dc.titleAnalysis of combustion process of spark ignition engine fuelled with buthanol – petrol mixture and a hho enriched air
dc.typeStraipsnis recenzuotame konferencijos darbų leidinyje / Paper published in peer-reviewed conference publication
dcterms.accessRightsThe results of the research, described in the article, were obtained by using a virtual internal engine simulation tool AVL BOOST, acquired by signing the Cooperation Agreement between AVL Advanced Simulation Technologies and Faculty of Transport Engineering of Vilnius Gediminas Technical University.
dcterms.references12
dc.type.pubtypeP1d - Straipsnis recenzuotame konferencijos darbų leidinyje / Article published in peer-reviewed conference proceedings
dc.contributor.institutionVilniaus Gedimino technikos universitetas
dc.contributor.facultyTransporto inžinerijos fakultetas / Faculty of Transport Engineering
dc.subject.researchfieldT 003 - Transporto inžinerija / Transport engineering
dc.subject.researchfieldT 004 - Aplinkos inžinerija / Environmental engineering
dc.subject.ltspecializationsL106 - Transportas, logistika ir informacinės ir ryšių technologijos (IRT) / Transport, logistic and information and communication technologies
dc.subject.enButhanol
dc.subject.enHHO
dc.subject.enSpark timing
dc.subject.enSimulation
dcterms.sourcetitleInnovative technologies in engineering production (ITEP 2016) : international scientific conference, 19th-21th September 2016, Zuberec, Slovak republic
dc.publisher.nameUniversity of Zilina
dc.publisher.cityZilina
dc.identifier.elaba18310810


Šio įrašo failai

FailaiDydisFormatasPeržiūra

Su šiuo įrašu susijusių failų nėra.

Šis įrašas yra šioje (-se) kolekcijoje (-ose)

Rodyti trumpą aprašą