Duplex positioning method for increasing the fatigue life of threaded connections under eccentric loading

Abstract

A new method, duplex positioning method DPM, to increase the fatigue lifetime of the threaded connection under eccentric loading is presented. When DPM is applied, the most damaged stud regions periodically are removed from risky positions by a change of the stud’s and nut’s mutual position in the axial direction alongside with a change of the stud’s position in respect to bending plane. The mathematical model for DPM enables us to predict its efficiency. To simulate the fatigue strength of the stud the following was used: Patterson’s and Kenny’s thread deflection factors, solutions for the distributions of the axial load and bending moment along the threads, Neuber’s method for the stress concentration factors in multiplier notches, Heywood’s formulas for the stress due to the thread flank loading and for the combined stresses, as well as the results of the photoelastic analysis of the araldite models under eccentric loading.