Optimum fines content in manufactured sand for best overall performance of superplasticized concrete /

Abstract

Due to a shortage of river sand for concrete production, manufactured sand (MS) made from crushed rock has gradually become a substitute. It inherently contains some fines content, which has significant effects on the performance of concrete. To study the effects of the MS type and fines content on the workability, cohesiveness, and strength, concrete mixes made with granite MS or limestone MS and different fines contents at various water/binder ratios were tested. Moreover, the packing density, water film thickness (WFT), paste film thickness (PFT), and microstructures of the concrete mixes produced were examined to investigate if their changes were the root causes of the effects of the MS used. It was found that the use of granite MS attained higher workability and strength but lower cohesiveness, which apparently were caused by the higher packing density and larger WFT and PFT. Also, regardless of the MS type, a fines content of about 10% was the optimum for highest packing density and best concurrent workability-cohesiveness-strength performance. Correlation analysis revealed that the MS and fines content exerted their influences on the workability and cohesiveness through the WFT and PFT, and on the strength through the packing density and microstructure.