Show simple item record

dc.rights.licenseKūrybinių bendrijų licencija / Creative Commons licenceen_US
dc.contributor.authorShults, Roman
dc.contributor.authorKassymkanova, Khaini-Kamal
dc.contributor.authorSkopinova, Daria
dc.contributor.authorDemianenko, Roman
dc.contributor.authorMedvedskyi, Yurii
dc.date.accessioned2024-08-30T12:06:52Z
dc.date.available2024-08-30T12:06:52Z
dc.date.issued2020
dc.date.submitted2020-02-27
dc.identifier.issn2029-7092en_US
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/154796
dc.description.abstractThe first stage of any construction is carrying out excavation works. These works are high-priced and timeconsuming. Mostly, for geodetic control of the works, the surveyors are using total stations and GNSS equipment. Last decade, UAV technology was a breakthrough in the geodetic technologies market. One of the possible applications of UAV is the monitoring of excavation works. In the article, the opportunities and accuracy of UAV data while performing the excavation works were studied. The surveying of earth volume in the middle of construction works was made using DJI Phantom 4 UAV. The data were being processed using two photogrammetric software: Agisoft Metashape and PhotoModeler Premium. For comparison, the surveying also was made using a conventional total station. For each data source, the 3D models were generated. The obtained models were compared with each other in CloudCompare software. The comparison revealed the high accuracy of UAV data that satisfies customer’s requirements. For the case of two software comparing, it is better to process data using PhotoModeler. The PhotoModeler software allows performing in-depth data analysis and blunders searching.en_US
dc.format.extent6 p.en_US
dc.format.mediumTekstas / Texten_US
dc.language.isoenen_US
dc.relation.urihttps://etalpykla.vilniustech.lt/handle/123456789/154498en_US
dc.rightsAttribution 4.0 Internationalen_US
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/en_US
dc.source.urihttp://enviro.vgtu.lt/index.php/enviro/2020/paper/view/696en_US
dc.subjectunmanned aerial vehiclesen_US
dc.subjectgeospatial monitoringen_US
dc.subject3D modelingen_US
dc.subjectexcavation worksen_US
dc.subjectvolumesen_US
dc.titleUAV monitoring of excavation worksen_US
dc.typeKonferencijos publikacija / Conference paperen_US
dcterms.accessRightsLaisvai prieinamas / Openly availableen_US
dcterms.accrualMethodRankinis pateikimas / Manual submissionen_US
dcterms.alternativeTechnologies of geodesy and cadastreen_US
dcterms.dateAccepted2020-03-03
dcterms.issued2020-05-22
dcterms.licenseCC BYen_US
dcterms.references9en_US
dc.description.versionTaip / Yesen_US
dc.contributor.institutionKyiv National University of Construction and Architectureen_US
dc.contributor.institutionAl-Farabi Kazakh National Universityen_US
dcterms.sourcetitle11th International Conference “Environmental Engineering” (ICEE-2020)en_US
dc.identifier.eisbn9786094762321en_US
dc.identifier.eissn2029-7092en_US
dc.publisher.nameVilnius Gediminas Technical Universityen_US
dc.publisher.nameVilniaus Gedimino technikos universitetasen_US
dc.publisher.countryLithuaniaen_US
dc.publisher.countryLietuvaen_US
dc.publisher.cityVilniusen_US
dc.identifier.doihttps://doi.org/10.3846/enviro.2020.696en_US


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Kūrybinių bendrijų licencija / Creative Commons licence
Except where otherwise noted, this item's license is described as Kūrybinių bendrijų licencija / Creative Commons licence