Browsing Modern Building Materials, Structures and Techniques (MBMST) by Institution "Bialystok University of Technology"
Now showing items 1-12 of 12
-
Analysis of IT-CY stiffness modulus of foamed bitumen asphalt concrete compacted at 95°C
(Procedia Engineering, 2017)This study is to compare the results of temperature sensitivity tests of foamed bitumen asphalt concrete (AC 8) compacted at 95ºC with that of the reference mixture compacted at the conventional temperature of 140ºC. The ... -
Analysis of structural and material degradation of a car-park’s RC bearing structure due to city environmental influences
(Procedia Engineering, 2013)Many of concrete structures during their working life are subjected to influence of different unfavorable factors that can decrease within time their capacity and serviceability, which finally ends with the need of application ... -
Current directions in development of modern wood-framed houses
(Procedia Engineering, 2017)Realization of the wood-framed buildings in Europe and in the Nord America are discussed in the introduction to presented paper. Current directions in realizations of single family, multifamily and the other purpose the ... -
Experimental tests and numerical models of double side non-welded T RHS truss joints
(Procedia Engineering, 2013)Research on simple laser made T RHS joints is presented. Experimental evidence of such joint behaviour tested in natural scale is described. Geometry and material properties of tested connections are given. For each ... -
Identification of bending moment in semi-fixed beam
(Procedia Engineering, 2013)Paper presents procedure of identification of supporting moment in the statically indeterminable, partly fixed reinforced concrete beam. Examined beam is a part of reinforced concrete frame, where rate of fixing is subjected ... -
Investigation on concrete beams reinforced with basalt rebars as an effective alternative of conventional R/C structures
(Procedia Engineering, 2013)Basalt bars for concrete reinforcement called Basalt Fiber Reinforced Plastic (BFRP) is a new material, so it is necessary to identify the differences and limitations of their use in the concrete structures in relation ... -
Material and structural destruction of concrete elements in the industrial environment
(Procedia Engineering, 2017)A brief review of selected models which are currently used to describe the service life of structural systems, especially made of concrete is presented, taking into account influences and processes that cause material ... -
Semi-rigid behavior of joints in wood light-frame structures
(Procedia Engineering, 2017)The problem of behavior of the joint in wood light-frame structures were discussed in the paper. Two types of joint flexibility and their impact on the behavior of the structure were discussed. The results of the experimental ... -
Studies of RC beams made of recycling aggregate concrete strengthened with the HSC-HPC inclusions
(Procedia Engineering, 2013)This paper presents the studies of innovative RC flexural members made of recycled aggregate concrete strengthened by the local use of High Strength - High Performance Concrete. This concept of is based on precast concrete ... -
Surface scaling resistance of concrete subjected to freeze-thaw cycles and sustained load
(Procedia Engineering, 2017)The concrete resistance to surface scaling under combined freeze-thaw cycles, sodium chloride solution and external flexural load was experimentally investigated. The test were carried out for non-air-entrained, air-entrained ... -
Surface scaling resistance of concrete with fly ash from co-combustion of coal and biomass
(Procedia Engineering, 2013)The co-combustion of coal and biomass is connected with enforcing EU regulations concerning the application of renewable sources of energy. The more widely and efficiently that fuel is utilized the better this fact affects ... -
The use of BIM technology in the process of analyzing the increased effort of structural elements
(Procedia Engineering, 2017)The use of BIM technology in the implementation of new buildings has been successful, in recent years becoming an essential tool for facilitating the process of design, implementation and use. Improving solutions and ...