Now showing items 41-53 of 53

    • Mechanical performance of biodegradable hemp shivs and corn starch-based biocomposite boards 

      Kremensas, Arūnas; Kairytė, Agnė; Vaitkus, Saulius; Vėjelis, Sigitas; Balčiūnas, Giedrius; Strąkowska, Anna; Członka, Sylwia (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      For the production of traditional building materials, excavated natural resources are used. The production process of such materials requires high-energy demands, wherefore, high amounts of CO2 gases, which have a great ...
    • Chemical and physical investigations of historic mortars in St. John’s Church (Cesis, Latvia) 

      Kirilovica, Inta; Karpe, Margarita (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      This paper deals with the stone material investigation of St. John’s Church, located in Cesis, the city in central region of Latvia. Following aspects were considered – chemical, physical and granulometrical characterization ...
    • Mechanical properties of copper slag waste based CLSM mixtures 

      Jaskulski, Roman; Kubissa, Wojciech (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The article presents the results of investigations of the compressive strength of controlled low-strength materials (CLSM) prepared with the use of copper slag waste as a filler. Eighteen mixtures were made of which part ...
    • Study of the influence of the secondary raw materials on microstructure and properties of calcium silicate composite 

      Húšťavová, Jana; Černý, Vít; Drochytka, Rostislav (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Calcium silicate composites are a widely used building material, especially autoclaved aerated concrete or sand-lime bricks. The physico-mechanical properties of these materials depend on their microstructure. Microstructure ...
    • Long-term properties of foamed concrete 

      Gailitis, Rihards; Sprince, Andina; Pakrastins, Leonids; Shakhmenko, Genadijs; Kozlovskis, Tomass; Radina, Liga (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Foamed concrete has been used as a building material since the early 1920s. In the beginning, it was used as an insulation material with very low density. Since then there have been attempts to improve the structural ...
    • Mechanical properties of solid glass bricks 

      Fíla, Jiří; Eliášová, Martina; Sokol, Zdeněk (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Glass as one of the oldest building materials has been used for centuries to fill window openings. In recent years is it increasingly used also for load-bearing structural elements such as beams, columns, ribs, railings, ...
    • Influence of activation of microsphere and latex base addition on mechanical properties of concrete 

      Dobaczewska, Wioletta; Kubissa, Wojciech; Prałat, Karol; Tomczak, Patryk (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      In a modern civil engineering, it is important to erection construction in extremely complicated and difficult environmental conditions. Additives and admixes to concrete enable to achieved higher mechanical properties of ...
    • Wall blocks based on the aggregates from plant wastes 

      Dalzhonak, Andrei; Bakatovich, Aliaksandr (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The article considers the possibility of using agricultural waste in the development of new building materials in the form of wall blocks. When selecting the compositions, the ideal fractions and ratios of straw to flax ...
    • The workability kinetics of phosphogypsum binder 

      Bumanis, Girts; Zorica, Jelizaveta; Pundienė, Ina; Bajare, Diana (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The dihydrate phosphogypsum (PG) based binder workability kinetics were investigated regarding to water-binder ratio (W/B) and chemical admixtures added to the composition of PG paste. PG was dried at 60 °C and homogenized ...
    • The effect of glass powder on physical and mechanical properties of hardened cement paste 

      Barkauskas, Kęstutis; Nagrockienė, Džigita; Girnienė, Ingrida (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The article analyses the effect of finely crushed glass on the properties of hardened cement paste. Materials used for the test: Portland cement CEM I 42.5 R, finely crushed glass (particle size ≤75 µm), and water. Seven ...
    • Investigations on lightweight concrete prepared by combinations of rubber particles and expanded glass aggregate 

      Adhikary, Suman Kumar; Rudžionis, Žymantas (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Lightweight concrete is a very useful building material used in the construction sector for providing better insulation and lower energy consumption. Properties of lightweight aggregate, water-cement ratio, and other ...
    • Evaluation of physical and mechanical properties of fired-clay bricks incorporating both mineral and organic wastes 

      Achik, Maryam; Benmoussa, Hayat; Oulmekki, Abdellah; Ijjaali, M.; EL Moudden, N.; Kizinievic, Olga; Kizinievic, Viktor (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The clay brick is one of the oldest building materials, and as the use of waste in the bricks can reduce clay consummation and the environmental burden due to the accumulation of waste, the present study was chosen, the ...
    • Modern Building Materials, Structures and Techniques (MBMST 2019) 

      Vilnius Gediminas Technical University; Vilniaus Gedimino technikos universitetas; Statybos fakultetas / Faculty of Civil Engineering (2019)