Now showing items 1-19 of 19

    • Corrosion resistance dry building mortars base on alkaline slag binder for using in aggressive sulfate medium 

      Turchin, Vadim; Sychugov, Stanislav; Yudina, Ludmila; Gumeniuk, Alexander; Zhilkina, Tatyana; Gmizov, Yuriy; Mackevicius, Rimantas; Ivanova, Tatyana (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Dry Building Mortars (DBM) are new in terms of building technology, and they sometimes substitute different kinds of concrete and mortar mixes. DBM have been successfully used in construction and their performance has been ...
    • Damage of prestressed concrete railway sleepers and its impact on durability 

      Jokūbaitis, Aidas; Marčiukaitis, Gediminas; Valivonis, Juozas (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Prestressed concrete railway sleepers are the most widespread sleepers due to their stiffness and high bearing capacity. They transfer train induced loads from the rails directly to the ballast and therefore are the most ...
    • Degree of MWCNT suspension dispersity and its influence on rheology of cement pastes 

      Skripkiūnas, Gintautas; Karpova, Ekaterina; Bendoraitienė, Joana; Barauskas, Irmantas; Drochytka, Rostislav (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Modification of cement pastes by MWCNT (multi-walled carbon nanotubes) suspension enables to manage by their rheological properties due to the nanometer size of MWCNT. Dispersity degree of MWCNT suspension may be determined ...
    • Development of an anchorage prototype for CFRP stress-ribbon systems using 3D printing technique 

      Gribniak, Viktor; Arnautov, Aleksandr K.; Rimkus, Arvydas (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Compared with other structure types, stress-ribbon systems are extremely simple though requiring massive anchorage blocks because of very large tensile stresses induced in the ribbons. Such structural systems are efficient ...
    • Effect of aggregate particle shape and granulometry on the workability and mechanical properties of glass reinforced concrete 

      Moceikis, Rimvydas; Kičaitė, Asta; Skripkiūnas, Gintautas (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Modern alkali resistant glass fibers (ARG) modified with 17% ZrO2 are getting more popular as reinforcement of cementitious matrixes. Typical matrix compositions with quartz, Portland cement, 13 mm length ARG glass fibres ...
    • The effect of concrete creep on the long-term tension-stiffening law and prediction of a time-dependent inertia moment of the cracked RC flexural cross-sections 

      Balevičius, Robertas (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      In the paper, a long-term stress-strain model is proposed for predicting the deformational response of the cracked reinforced concrete beams subjected to sustained bending. The linear and non-linear evolution creep strains ...
    • The effect of glass powder on physical and mechanical properties of hardened cement paste 

      Barkauskas, Kęstutis; Nagrockienė, Džigita; Girnienė, Ingrida (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The article analyses the effect of finely crushed glass on the properties of hardened cement paste. Materials used for the test: Portland cement CEM I 42.5 R, finely crushed glass (particle size ≤75 µm), and water. Seven ...
    • Evaluation of physical and mechanical properties of fired-clay bricks incorporating both mineral and organic wastes 

      Achik, Maryam; Benmoussa, Hayat; Oulmekki, Abdellah; Ijjaali, M.; EL Moudden, N.; Kizinievic, Olga; Kizinievic, Viktor (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The clay brick is one of the oldest building materials, and as the use of waste in the bricks can reduce clay consummation and the environmental burden due to the accumulation of waste, the present study was chosen, the ...
    • Experimental study of the behaviour of cement pastes in the presence of carbon nanotubes 

      Šukys, Ritoltas; Pranckevičienė, Jolanta; Girskas, Giedrius; Pundienė, Ina; Leonavičius, Dainius; Kligys, Modestas (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      One of the methods recently applied for the noticeably improvement of properties of cementitious materials is the use of the single or multi-walled carbon nanotubes (CNTs) as nano-reinforcements in cementitious materials. ...
    • High strength steel cold-formed hollow sections: implication of cross-section aspect ratio and slenderness characteristics on flexural behavior 

      Adib, Shady; Misiunaitė, Ieva (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Cold-formed tubular sections are widely applicated for a variety of structural solutions, primarily due to their advantageous structural properties, inherent aesthetic characteristics and ease of prefabrication and mass ...
    • High-strength fluoroanhydrite composition 

      Yakovlev, Grigory; Kerienė, Jadvyga; Grakhov, Valery; Drochytka, Rostislav; Gordina, Anastasiya; Pichugin, Anatoly; Bazhenov, Kirill; Troshkova, Viktoriya (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The research studies the properties of a high-strength anhydrite composition based on fluoroanhydrite, a waste product of hydrofluoric acid. To activate fluoranhydrite, Na3PO4 sodium phosphate was added to the composition ...
    • Internet of Things (IoT) for digital concrete quality control (DCQC): A conceptual framework 

      Ghosh, Arka; Hosseini, M. Reza; Al-Ameri, Riyadh; Kaklauskas, Gintaris; Nikmehr, Bahareh (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      Concreting is generally a manual, labour intensive and time-consuming process, putting additional burden on constrained resources. Current practices of concreting are wasteful, non-sustainable and end products usually lack ...
    • Mechanical performance of biodegradable hemp shivs and corn starch-based biocomposite boards 

      Kremensas, Arūnas; Kairytė, Agnė; Vaitkus, Saulius; Vėjelis, Sigitas; Balčiūnas, Giedrius; Strąkowska, Anna; Członka, Sylwia (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      For the production of traditional building materials, excavated natural resources are used. The production process of such materials requires high-energy demands, wherefore, high amounts of CO2 gases, which have a great ...
    • Modern Building Materials, Structures and Techniques (MBMST 2019) 

      Vilnius Gediminas Technical University; Vilniaus Gedimino technikos universitetas; Statybos fakultetas / Faculty of Civil Engineering (2019)
    • Moment redistribution in continuous prestressed concrete box girder with corrugated steel webs 

      Du, Jin-Sheng; Ng, Pui-Lam; Ma, Xiang; Wang, Jian (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      A fibre-finite-element model of continuous prestressed concrete (PC) composite box girder with corrugated steel webs is established with force-based elements using OpenSees. After the model is validated with existing ...
    • The numerical analysis of the long-term behaviour of the reinforced concrete beams strengthened with carbon fiber reinforced polymer: Deflection 

      Daugevičius, Mykolas; Valivonis, Juozas; Skuturna, Tomas (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The numerical analysis of the reinforced concrete beams strengthened with CFRP is presented. The beams previously tested experimentally under long-term loading are selected for numerical simulation. The numerical modelling ...
    • The numerical analysis of the long-term behaviour of the reinforced concrete beams strengthened with carbon fibre reinforced polymer: Cracking 

      Daugevičius, Mykolas; Valivonis, Juozas; Skuturna, Tomas (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The paper presents the analysis of the long-term deformability of the reinforced concrete beams strengthened with CFRP. The analysis is based on the obtained numerical and experimental data. The development of deformations ...
    • Production of fired clay brick from municipal solid waste incinerator fly ash 

      Voišnienė, Violeta; Kizinievič, Olga; Kizinievič, Viktor; Malaiškienė, Jurgita (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      This paper is a report on the results of a feasibility study on the immobilization of municipal solid waste incinerator fly ash by producing a fired clay brick. The main purpose of this work was to test the clay used in ...
    • The workability kinetics of phosphogypsum binder 

      Bumanis, Girts; Zorica, Jelizaveta; Pundienė, Ina; Bajare, Diana (International Conference Modern Building Materials, Structures and Techniques (MBMST 2019), 2019)
      The dihydrate phosphogypsum (PG) based binder workability kinetics were investigated regarding to water-binder ratio (W/B) and chemical admixtures added to the composition of PG paste. PG was dried at 60 °C and homogenized ...