Rodyti trumpą aprašą

dc.rights.licenseKūrybinių bendrijų licencija / Creative Commons licenceen_US
dc.contributor.authorReiterman, Pavel
dc.contributor.authorKeppert, Martin
dc.date.accessioned2024-12-13T09:38:37Z
dc.date.available2024-12-13T09:38:37Z
dc.date.issued2019
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/156052
dc.description.abstractSedimented concrete slurry waste (CSW), containing cement, mineral additives, fine fillers, admixtures and water, is currently a waste without an additional use and has to be fully landfilled. Current CSW management is very expensive and introduces number of environmental risks due to its high pH, exceeding 11.5. This paper deals with the application of two types of CSW as cement replacement in cement screed. The evaluation was carried out in terms of workability and basic mechanical performance of the obtained composites. The applied cement replacement was up to 10 wt.% due to the negative impact on the rheology of fresh mixtures. Reduced workability consequently caused higher content of air in the fresh mixture. It was reflected by lower values of bulk density in hardened state for both studied CSW. These aspects were the reasons of decreased mechanical performance by approximately 15% per 5 wt.% of replacement. Conducted experimental program declared significant limits of CSW application in cement based composites, however additional processing of CSW could significantly modify its properties.en_US
dc.description.sponsorshipCzech Science Foundationen_US
dc.format.extent6 p.en_US
dc.format.mediumTekstas / Texten_US
dc.language.isoenen_US
dc.relation.urihttps://etalpykla.vilniustech.lt/handle/123456789/156029en_US
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectconcrete slurry wasteen_US
dc.subjectcement screeden_US
dc.subjectwaste materialen_US
dc.titleApplication of concrete slurry waste in cement screedsen_US
dc.typeKonferencijos publikacija / Conference paperen_US
dcterms.accessRightsLaisvai prieinamas / Openly availableen_US
dcterms.accrualMethodRankinis pateikimas / Manual submissionen_US
dcterms.alternativeMaterialsen_US
dcterms.issued2019-05-17
dcterms.licenseCC BYen_US
dcterms.references23en_US
dc.description.versionTaip / Yesen_US
dc.contributor.institutionCzech Technical University in Pragueen_US
dcterms.sourcetitleInternational Conference Modern Building Materials, Structures and Techniques (MBMST 2019)en_US
dc.identifier.eisbn9786094761973en_US
dc.identifier.eissn2029-9915en_US
dc.publisher.nameVilnius Gediminas Technical Universityen_US
dc.publisher.nameVilniaus Gedimino technikos universitetasen_US
dc.publisher.countryLithuaniaen_US
dc.publisher.countryLietuvaen_US
dc.publisher.cityVilniusen_US
dc.description.grantnumber19-11027Sen_US
dc.identifier.doihttps://doi.org/10.3846/mbmst.2019.072en_US


Šio įrašo failai

Thumbnail
Thumbnail

Šis įrašas yra šioje (-se) kolekcijoje (-ose)

Rodyti trumpą aprašą

Kūrybinių bendrijų licencija / Creative Commons licence
Išskyrus atvejus, kai nurodyta kitaip, šio įrašo licencija apibrėžiama taipKūrybinių bendrijų licencija / Creative Commons licence