dc.rights.license | Kūrybinių bendrijų licencija / Creative Commons licence | en_US |
dc.contributor.author | Brandl, Heinz | |
dc.date.accessioned | 2025-03-19T08:17:40Z | |
dc.date.available | 2025-03-19T08:17:40Z | |
dc.date.issued | 2013 | |
dc.identifier.issn | 1877-7058 | en_US |
dc.identifier.uri | https://etalpykla.vilniustech.lt/handle/123456789/156932 | |
dc.description.abstract | Energy foundations and other thermo-active ground structures, energy wells, and pavement or bridge deck heating / cooling represent an innovative technology that contributes to environmental protection and provides substantial long-term cost savings and minimized maintenance. The paper focuses on earth-contact concrete elements that are already required for structural reasons, but which simultaneously work as heat exchangers. Absorber pipes filled with a heat carrier fluid are installed within conventional structural elements (piles, barrettes, diaphragm walls, basement slabs or walls, tunnel linings), forming the primary circuit of a geothermal energy system. The natural ground temperature is used as a heat source in winter and for cooling in summer. Hence no additional elements have to be installed below surface. The primary circuit is then connected via a heat pump to a secondary circuit within the building. Benefits of energy foundations are also listed in this paper. | en_US |
dc.format.extent | 10 p. | en_US |
dc.format.medium | Tekstas / Text | en_US |
dc.language.iso | en | en_US |
dc.relation.uri | https://etalpykla.vilniustech.lt/handle/123456789/156173 | en_US |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 International | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.source.uri | https://www.sciencedirect.com/science/article/pii/S1877705813007352 | en_US |
dc.subject | energy foundation | en_US |
dc.subject | energy pile | en_US |
dc.subject | thermo-active ground-source structure | en_US |
dc.subject | geothermal geotechnics | en_US |
dc.title | Thermo-active ground-source structures for heating and cooling | en_US |
dc.type | Konferencijos publikacija / Conference paper | en_US |
dcterms.accessRights | Laisvai prieinamas / Openly available | en_US |
dcterms.accrualMethod | Rankinis pateikimas / Manual submission | en_US |
dcterms.issued | 2013-05-17 | |
dcterms.license | CC BY NC ND | en_US |
dcterms.references | 3 | en_US |
dc.description.version | Taip / Yes | en_US |
dc.contributor.institution | Vienna University of Technology | en_US |
dcterms.sourcetitle | Procedia Engineering | en_US |
dc.description.volume | vol. 57 | en_US |
dc.publisher.name | Elsevier | en_US |
dc.publisher.country | United Kingdom | en_US |
dc.publisher.city | Oxford | en_US |
dc.identifier.doi | https://doi.org/10.1016/j.proeng.2013.04.005 | en_US |