dc.rights.license | Kūrybinių bendrijų licencija / Creative Commons licence | en_US |
dc.contributor.author | Parasonis, Josifas | |
dc.contributor.author | Keizikas, Andrius | |
dc.date.accessioned | 2025-05-20T09:10:01Z | |
dc.date.available | 2025-05-20T09:10:01Z | |
dc.date.issued | 2013 | |
dc.identifier.issn | 1877-7058 | en_US |
dc.identifier.uri | https://etalpykla.vilniustech.lt/handle/123456789/157653 | |
dc.description.abstract | Until the 21st century, in the countries of cold climate, windows have been considered to be the elements of the buildings, through which
large quantities of heat leak in the heating season. Nowadays modern technologies allow engineers to improve thermodynamic
characteristics of these external enclosures, so that in some cases, even a favorable thermal balance can be obtained. However, better
results can still be achieved. The paper presents the results of the research into energy balance of enclosure walls depending on geometric
characteristics and glazed areas of a building. In this context, the possibility of using a dynamic window protection system is discussed
and its influence on the energy balance is determined. The results obtained show that the influence is considerable. | en_US |
dc.format.extent | 7 p. | en_US |
dc.format.medium | Tekstas / Text | en_US |
dc.language.iso | en | en_US |
dc.relation.uri | https://etalpykla.vilniustech.lt/handle/123456789/156173 | en_US |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 International | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.source.uri | https://www.sciencedirect.com/science/article/pii/S1877705813008436 | en_US |
dc.subject | energy efficiency | en_US |
dc.subject | dynamic window protection | en_US |
dc.subject | building compactness | en_US |
dc.title | Increasing energy efficiency of the translucent enclosure walls of a building | en_US |
dc.type | Konferencijos publikacija / Conference paper | en_US |
dcterms.accessRights | Laisvai prieinamas / Openly available | en_US |
dcterms.accrualMethod | Rankinis pateikimas / Manual submission | en_US |
dcterms.issued | 2013-05-17 | |
dcterms.license | CC BY NC ND | en_US |
dcterms.references | 29 | en_US |
dc.description.version | Taip / Yes | en_US |
dc.contributor.institution | Vilniaus Gedimino technikos universitetas | en_US |
dc.contributor.institution | Vilnius Gediminas Technical University | en_US |
dc.contributor.faculty | Statybos fakultetas / Faculty of Civil Engineering | en_US |
dcterms.sourcetitle | Procedia Engineering | en_US |
dc.description.volume | vol. 57 | en_US |
dc.publisher.name | Elsevier | en_US |
dc.publisher.country | United Kingdom | en_US |
dc.publisher.city | Oxford | en_US |
dc.identifier.doi | https://doi.org/10.1016/j.proeng.2013.04.110 | en_US |