Show simple item record

dc.rights.licenseKūrybinių bendrijų licencija / Creative Commons licenceen_US
dc.contributor.authorUrbanski, Marek
dc.contributor.authorLapko, Andrzej
dc.contributor.authorGarbacz, Andrzej
dc.date.accessioned2025-05-26T13:15:25Z
dc.date.available2025-05-26T13:15:25Z
dc.date.issued2013
dc.identifier.issn1877-7058en_US
dc.identifier.urihttps://etalpykla.vilniustech.lt/handle/123456789/157696
dc.description.abstractBasalt bars for concrete reinforcement called Basalt Fiber Reinforced Plastic (BFRP) is a new material, so it is necessary to identify the differences and limitations of their use in the concrete structures in relation to traditional steel reinforcement of concrete structures. The paper presents some chosen results of pilot research on the series of simply supported beams under flexure, reinforced with BFRP bars, compared to the reference beams with steel reinforcement. The tested beams were made of C30/37 concrete and reinforced with basalt bars with 8 mm diameter having and tensile strength evaluated from the tensile tests. The analysis of the beam deflection and cracking behavior has been presented. The results show the different character of the load-deflection relationship of basalt reinforced beams compared to traditionally steel reinforced beams, as well as the significant influence of the type and quality of anchoring on the process of basalt bars tensile process.en_US
dc.format.extent9 p.en_US
dc.format.mediumTekstas / Texten_US
dc.language.isoenen_US
dc.relation.urihttps://etalpykla.vilniustech.lt/handle/123456789/156173en_US
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.source.urihttps://www.sciencedirect.com/science/article/pii/S1877705813008825en_US
dc.subjectbasalt rebarsen_US
dc.subjectBFRPen_US
dc.subjectflexural capacityen_US
dc.subjectreinforced concreteen_US
dc.subjectbonden_US
dc.titleInvestigation on concrete beams reinforced with basalt rebars as an effective alternative of conventional R/C structuresen_US
dc.typeKonferencijos publikacija / Conference paperen_US
dcterms.accessRightsLaisvai prieinamas / Openly availableen_US
dcterms.accrualMethodRankinis pateikimas / Manual submissionen_US
dcterms.issued2013-05-17
dcterms.licenseCC BY NC NDen_US
dcterms.references24en_US
dc.description.versionTaip / Yesen_US
dc.contributor.institutionWarsaw University of Technologyen_US
dc.contributor.institutionBialystok University of Technologyen_US
dcterms.sourcetitleProcedia Engineeringen_US
dc.description.volumevol. 57en_US
dc.publisher.nameElsevieren_US
dc.publisher.countryUnited Kingdomen_US
dc.publisher.cityOxforden_US
dc.description.fundingorganizationEuropean Unionen_US
dc.description.grantnumberPOIG.01.01.02-10-106/09-01 (PT2.3)en_US
dc.identifier.doihttps://doi.org/10.1016/j.proeng.2013.04.149en_US


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Kūrybinių bendrijų licencija / Creative Commons licence
Except where otherwise noted, this item's license is described as Kūrybinių bendrijų licencija / Creative Commons licence