dc.rights.license | Kūrybinių bendrijų licencija / Creative Commons licence | en_US |
dc.contributor.author | Ružinskas, Andrius | |
dc.contributor.author | Sivilevičius, Henrikas | |
dc.date.accessioned | 2025-08-19T12:25:23Z | |
dc.date.available | 2025-08-19T12:25:23Z | |
dc.date.issued | 2017 | |
dc.identifier.issn | 1877-7058 | en_US |
dc.identifier.uri | https://etalpykla.vilniustech.lt/handle/123456789/158748 | |
dc.description.abstract | Magic Formula (MF) tyre model is widely used for the analysis of tyre behavior in different driving situations. The model is mostly used to fit the simulation and experimental data slip curves. As there are many modifications of the MF, this paper presents a literature analysis of MF application and fitting techniques. A short review of other empirical tyre models was also made. At the end, a simple least squares minimization technique was used to fit the experimental data of longitudinal tyre performance on ice. Measurements were performed with the inner drum test rig in the laboratory. In general, the fitting showed a very good accuracy. | en_US |
dc.description.sponsorship | Institute of Vehicle System Technology | en_US |
dc.format.extent | 7 p. | en_US |
dc.format.medium | Tekstas / Text | en_US |
dc.language.iso | en | en_US |
dc.relation.uri | https://etalpykla.vilniustech.lt/handle/123456789/158656 | en_US |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 International | en_US |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | en_US |
dc.source.uri | https://www.sciencedirect.com/science/article/pii/S1877705817319136 | en_US |
dc.subject | Magic Formula | en_US |
dc.subject | tyre | en_US |
dc.subject | slip ratio | en_US |
dc.subject | ice | en_US |
dc.subject | least squares minimization | en_US |
dc.title | Magic formula tyre model application for a tyre-ice interaction | en_US |
dc.type | Konferencijos publikacija / Conference paper | en_US |
dcterms.accessRights | Laisvai prieinamas / Openly available | en_US |
dcterms.accrualMethod | Rankinis pateikimas / Manual submission | en_US |
dcterms.issued | 2017-05-05 | |
dcterms.license | CC BY NC ND | en_US |
dcterms.references | 17 | en_US |
dc.description.version | Taip / Yes | en_US |
dc.contributor.institution | Vilniaus Gedimino technikos universitetas | en_US |
dc.contributor.institution | Vilnius Gediminas Technical University | en_US |
dc.contributor.faculty | Transporto inžinerijos fakultetas / Faculty of Transport Engineering | en_US |
dcterms.sourcetitle | Procedia Engineering | en_US |
dc.description.volume | vol. 187 | en_US |
dc.publisher.name | Elsevier | en_US |
dc.publisher.country | United Kingdom | en_US |
dc.publisher.city | Oxford | en_US |
dc.identifier.doi | https://doi.org/10.1016/j.proeng.2017.383 | en_US |