10th International Conference “Environmental Engineering” (ICEE-2017)
Recent Submissions
-
Researches of aggressive gas flow cleaning from wood ash particulate matter in the multi-channel cyclone
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)The studies examined the gas flow aerodynamic parameters and treatment efficiency from the wood ash particulate matter, also an adhesion dependencies in multi-channel cyclone using aggressive gas flow – temperature up to ... -
Using ion-selective electrodes in environmental monitoring
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Environmental monitoring is an integral part of environmental protection. Control of hazardous substances wastewater occurs both in the laboratory and on-site sampling. The paper provides a method of injection analysis, ... -
Development of compressive strength of slag based cement mortars exposed to an aggressive sulphate environment
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Sulfuric acid corrosion can cause severe damage to concrete and cement composites. There are a variety of approaches to enhancing the sustainability of concrete and mortar one of which is to enhance the durability of ... -
Tensile strength of barrier material
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)The most significant element of the municipal landfill construction is leak-proof assurance which reduces the negative influence of waste on the environment. Mineral liners and covers are correctly built-in cohesive soil ... -
Triple blending with superfine natural zeolite and condensed silica fume to improve performance of cement paste
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Superfine natural zeolite (SNZ) is obtained by grinding natural zeolite to microfine-size, whereas condensed silica fume (CSF) is byproduct of ferrosilicon industry. Both SNZ and CSF are environmentally-friendly supplementary ... -
Prediction of hydraulic conductivity of fly ash built-in mineral sealing layers
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Mineral barrier protects the groundwater and soil from contamination by insulating the leakage of harmful substances from landfill. One of the most important parameters, which decides about usefulness of material to built-in ... -
Theoretical end experimental evaluation of perforations effect on sound insulation
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)To design a sound-absorbing panel, it is important to identify factors that affect the maximum sound absorption of low, middle and high frequency sounds. Perforation effect is very important for the noise-reducing and ... -
Lignin from hydrolyzed wood by-product as an eco-friendly emulsion stabilizer
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Aspen sulfur free soda lignin was obtained as a result of alkaline delignification of hydrolyzed sawdust, a by-product of wood mechanical processing. The pre-hydrolysis of aspen sawdust was performed for enhancing the yield ... -
Research on odours emitted from non-hazardous waste landfill using dynamic olfactometry
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)The article analyses the existing research on odour emissions from the passive odour source – municipal landfill for non azardous waste. The current research has been carried out in the Vilnius county, at the Kazokiškės ... -
Benefits from constructing a dam across the Vistula in Siarzewo in terms of transport and environmental protection
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)This paper presents the results of analyses that concern the benefits from the planned construction of a dam across the Vistula in Siarzewo. The simulated transport model developed in the VISUM environment has been used ... -
Analysis of potential application of biogas fuel in modern compression-ignition engines
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Limited fossil fuel supplies and the necessary reduction in toxic fumes emission to the atmosphere are the main motives in conducting a search for the new, effective energy supplies. The one with potential is biogas. It ... -
The impact of landslides on local infrastructure and the environment
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Landslides are environmental processes that lead to natural disasters or technical failures, the effects of which usually threaten the life, health and property of people. In the classification of natural disasters and ... -
Developing novel photocatalytic cementitious permeable pavements for depollution of contaminants and impurities in urban cities
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Photocatalyst such as Titanium Dioxide (TiO2) has been recently introduced as a nanoparticle into cementitious permeable pavements. Combining photocatalytic compounds within concrete permeable pavements can aid with ... -
Calculation of the probability integral indicator of the level of air pollution
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)This article describes the method for calculation of probability integral indicator of the level of air pollution. The calculation is based on information on easily identifiable meteorological parameters by using neural ... -
The ecological diversity of vegetation within urban parks in the Dabrowski Basin (southern Poland)
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)The aim of this work is to present the diversity of flora in terms of ecological requirements. The research was conducted in the area of two urban parks in the area of two cities in southern Poland: Bedzin and Czeladz. ... -
Quick setting composition based on steelmaking metallurgical slag
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)The article deals with the problem of utilizing steelmaking slag from the production of rapid hardening composition in Izhstal, CJSC (Izhevsk, Russia), determining its physical and mechanical characteristics, and applying ... -
Modelling of piezoelectric transducers for environmental monitoring
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)World Health Organization (WHO) defined health as being “a state of complete physical, mental, and social well-being and not merely the absence of disease or infirmity”. Physical factors (noise, vibration, electromagnetic ... -
Accumulation of Cd in the early stages of the development of rainbow trout Oncorhynchus mykiss Exposed to Cd-based quantum dots and Cd salt
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)The main aims of the present study were: 1) to determine the concentration of Cd in water during the experiment after longterm exposure to rainbow trout embryos and larvae to sublethal concentrations of Cdbased quantum ... -
Effect of applied weather data sets on the computational assessment of hygrothermal performance of historical masonry
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Several historical wall assemblies together with several weather data sets are investigated in order to study the effect of environmental load on hygrothermal performance of historical buildings. The effect of weather data ... -
Experimental study of droplet biofilter packed with green sphagnum
(10th International Conference “Environmental Engineering” (ICEE-2017), 2017)Air cleaning from VOC (volatile organic compunds) group of contaminants could be done by using different types of methods: adsoption, absorption, chemical or thermal oxidation. However, the most promising method is bio ...
RSS 1.0