Vibrations measurement of the funicular generated vibrations on Gediminas Hill North part slope
Peržiūrėti/ Atidaryti
Data
2017Autorius
Skuodis, Šarūnas
Kelevišius, Kęstutis
Žaržojus, Gintaras
Metaduomenys
Rodyti detalų aprašąSantrauka
An experimental measurements of the funicular generated vibrations provided after Gediminas Hill North part slope landslide, which occurred on 2016. The geology of Gediminas Hill made up strata of Quaternary system late Pleistocene glacial and glaciofliuvial coarse and fine deposit. The purpose of this measurement was to determine, whether funicular generated vibrations during exploitation is the significant slope destabilizing factor. For vibration measurements in X, Y and Z directions were implemented equipment, developed by the authors. Measurements in 25 different points on the Gediminas Hill slope were perfirmed during funicular movement up and down. Analysis of obtained results revealed, that the highest vibration level mainly localized at the top of funicular foundations, wave energy is not large, propagating waves greatly dampens in the soil and there is no effect for general slope stability and the funicular exploitation was not the main reason of the occurred landslide in 2016 Spring.
Paskelbimo data (metai)
2017Autorius
Skuodis, ŠarūnasSu šiuo įrašu susieti šie licencijos failai:
Išskyrus atvejus, kai nurodyta kitaip, šio įrašo licencija apibrėžiama taipKūrybinių bendrijų licencija / Creative Commons licence
Related items
Showing items related by title, author, creator and subject.
-
Vibration and noise measurements during silage thickening with inertia directional vibrator
Jasinskas, Algirdas; Šarauskis, Egidijus; Butkus, Vidmantas; Jotautienė, Eglė; Mieldažys, Algimantas; Viselga, Gintas (Journal of vibroengineering, 2010)Literature review and performed theoretical investigation indicates that it is environmentally and economically feasible for small and average size farms to use vibrational thickening method for silage preparation. However, ... -
The effect of variable rigidity of haulage rope on the vibration rate and reliability of “Trailed vibration roller - haulage rope” system
Bartulis, Vilius (Transport and telecommunication : proceedings of the international conference "Reliability and statistics in transportation and communication" (RelStat' 03), 16-17 October 2003 Riga, Latvi, 2004)If a slope is being compacted by a vibration roller trailed by means of a haulage rope, then the vibrations of the roller are transferred not only to the slope surface but to the haulage rope as well. To avoid resonant ... -
Engine vibration data increases prognosis accuracy on emission loads: A novel statistical regressions algorithm approach for vibration analysis in time domain
Žvirblis, Tadas; Vainorius, Darius; Matijošius, Jonas; Kilikevičienė, Kristina; Rimkus, Alfredas; Bereczky, Ákos; Lukács, Kristóf; Kilikevičius, Artūras (Symmetry: Special Issue Mechanics and Filtering Technology of Waste Particles, 2021)Statistical regression models have rarely been used for engine exhaust emission parameters. This paper presents a three-step statistical analysis algorithm, which shows increased prediction accuracy when using vibration ...